|
duneracer1 10-27-2007, 08:11 AM So I got my EFILive today and found out I still have to pull the radio and TBC1 fuse to get a communication, then to install a tune I had to uncheck the fast speed com button :mad: oh well, all I can say is what a sweet product. :D duneracer1 10-27-2007, 08:13 AM oh and I got a strange trouble code after clearing the stored ones, it was something to do with the HVAC recirculate control circuit, anyone else ever get that? Cougar281 10-27-2007, 09:44 AM oh and I got a strange trouble code after clearing the stored ones, it was something to do with the HVAC recirculate control circuit, anyone else ever get that? Yep. What year's your truck? My 04 was getting that. Your HVAC module probably needs an update. duneracer1 10-28-2007, 03:31 AM 04 lb7 LarryJewell 10-28-2007, 11:05 AM I rigged a toggle switch to kill the fuse rather than pulling it every time. Still have to re-set the stereo presets, but not as aggravating as pulling the fuse every time. SEA04DMAX 10-28-2007, 11:29 AM I have never done this is this Lb7 only??? I have a late 04. Josh2002cc 10-28-2007, 11:36 AM I dont pull any fuses, just shut off all radios and fan control. 05Smoker 10-28-2007, 12:40 PM Alpine and Clarion are fine. Pioneer still needs fuses pulled in my experiences. LarryJewell 10-28-2007, 01:01 PM I have a Clarion and still have to kill the fuse, It could be the Sirius tuner though and not the head unit. SEA04DMAX 10-28-2007, 01:46 PM AHHHH, it is needed for aftermarket radio....scared the crap outa me for a minute. MT Dmax Squid 10-28-2007, 02:38 PM I have a kenwood deck that I just shut off while d/ling. I don't pull any fuses. Parking brake goes on and I make sure I don't f with anything while it is working. No problems after probably 100 d/l's. Twister773 10-28-2007, 03:19 PM i have a pioneer and it can play while im dl'ing tune or whatever and i can have the ac or fan or whatever on...never pulled a fuse and never had a problem...50 d/ls so far:) LarryJewell 10-28-2007, 08:58 PM It may not be the head unit, I think its the Sirius tuner. Chevy350 10-29-2007, 12:27 AM Yea, Ive tuned with the avic-d3 blasting, heater going, door open.... it works great. fire0021 10-29-2007, 12:29 AM yep same here no issues with every thing on the only thing tht wont work is if i log with my cell phone charger plugged in it freezes duneracer1 10-29-2007, 01:52 AM Its got to be either my Pioneer deck or amp with the stereo prob, and the other fuse i'm not sure what is on that circuit that is causing probs. I'm pretty sure it is something I installed or it could be the onstar which I just had updated to the digital version. The toggle switch idea is a good one cause it does get old pulling out the fuses, but atleast I only have to pull 2 now instead of 4 like when I had my bullydog stuff. No matter what I do though with the HVAC controls off I always hear a lil fan running when the key is on, and I think that may be on that TBC1 circuit that gives me trouble. That may also be when I got an HVAC recirculator control circuit code when I check all the codes too EFI Support 11-01-2007, 01:59 AM Aftermarket radios and iPod adaptors are a known source of issue. Early on we contacted a number of manufactures who advised that they don't adhere to any silence commands and have no plans on doing so anytime soon. All factory fitted equipment do listen to silence commands and should never cause the user any problems. With HVAC make sure the tune your installing is made for your truck - ie you modified the stock tune from your truck. Do not load a tune from another source. If your using a tune off this site (even with the same OS) you will get problems if the segment numbers are different. Cheers Cindy Twister773 11-01-2007, 02:27 AM hey cindy...i thought i read somewhere that the new update would be out before sema...am i wrong...is it coming out soon, thanks! EFI Support 11-01-2007, 02:38 AM hey cindy...i thought i read somewhere that the new update would be out before sema...am i wrong...is it coming out soon, thanks! Funny thing about the update. Paul was compiling it, and in the process of uploading it for download............problem was as he started the upload, it was time to leave for the USA. After he made the Taxi wait 20 minutes while the upload was in process something went wrong and he didn't have time to fix it.......I guess it was just one of those things. It's ready to go for when we return - sometime around Nov 12th. Cheers Cindy Twister773 11-01-2007, 02:46 AM haha right on...im in vegas right now as well...do you know if taps will be able to be reset for 6 speed in this update... duneracer1 11-01-2007, 04:03 AM Thats what was funny about my HVAC code, it was happening before I even did any tunes with efilive, Its probally something with my truck, its been a pain in the ass since day one EFI Support 11-01-2007, 10:26 PM haha right on...im in vegas right now as well...do you know if taps will be able to be reset for 6 speed in this update... Not in this update. It's a Bi-directional control that Paul needs to implement. By the amount of people who have called by our booth at SEMA and asked, he's starting to get the idea it needs to be a high priority. Cheers Cindy epb091786 11-02-2007, 03:22 AM My Kenwood deck talks like crazy when I try to re-flash. It used to be only when I flash my Allison but now it is talking when I flash the ECM. Bentley BTW 1,000 posts!!!! Twister773 11-02-2007, 03:26 AM bummer, but thanks for the info cindy...im gonna try to swing by sema tommorow and see the DP vendors...thanks again! | ||