Which is better for performance. I was looking at the stylin concepts 5' stacks or the mbrp cool duals. Which is louder out of the two and which one out of the two would you all reccommend. Thanks for the info.:ro)

mbrp cool duels :D

IF??? If you had a Dodge I would say go with the stacks but You have the Bowtie put the Duals on . Just my .02

Ray's stacks look cool w/ lots of black smoke rolling out.

I am putting 5 inch bull haulers on mine in a few days. Can't wait.

Where do you find info on rays or bull haulers. Thanks for the info

mbrp cool duels :D

I agree.


Stacks just make you look like a wanna be trucker, more people will point and laugh than go, OH Cool.......JMHO no flames;)

When I hear stacks I think of Dodge's Little Red Wagon.

Around here the only guys with stacks 1) drive Dodges and 2) have converted some sort of household appliance into a lawn ornament. I think Cool Duals all the way.

Well you guys live in different ends of the country. They are very popular in the south. No offense taken, but they look great to me, and sound better than duals down low.

Post some pics when you get them on Hired Gun. Neighbor has 6" turnouts on his Doodge and they don't look too bad now. I've gotten used to them I think. Youv'e gotta have the right truck to have stacks and yours would look good I think.

If it's done right stacks can look pretty cool. I think the stylin' stacks have the goofy heat shield over them-:t . I personally like slash cut stacks that just come over the roof just about an inch or two. It's all personal opinion.

If i did stacks on my truck they would be straight cut..... with FLAPPERS on them.... so i could listen to that sweet tiing-a-ling at idle...... then have them flip forward under FULL FUEL!

Get that on Video!

If i did stacks on my truck they would be straight cut..... with FLAPPERS on them.... so i could listen to that sweet tiing-a-ling at idle...... then have them flip forward under FULL FUEL!

Get that on Video! Rain caps do look sweet on dual exhaust. I remember seeing an old GMC Astro with a DD hauling steel in Pittsburgh just a screamin'.

Miter cuts are nice, but when it rains you have a mess. I will post pics when I get them done. Along with my pipe work. Thats a key to EGT flow as well.

I was talking about Ray (white duramax), at Muncie pulling they looked good.

If I didn't have a cabover camper it would be Stacks...:ro) I personaly am looking at there side discharge system when it comes out):h I know its a picture of a FORD.... but all the other pics were DODGE'S:D

http://www.blackclouddiesel.com/Stacks/stacks.htm

http://www.blackclouddiesel.com/Stacks/gssidepipes.jpg

I love my stacks. It looked better with no tool box but it is a work truck.

If I didn't have a cabover camper it would be Stacks...:ro) I personaly am looking at there side discharge system when it comes out):h I know its a picture of a FORD.... but all the other pics were DODGE'S:D

http://www.blackclouddiesel.com/Stacks/stacks.htm

http://www.blackclouddiesel.com/Stacks/gssidepipes.jpg

Thats cool! Nerf bars with built in exhaust! :ro)

OK, sounds like we need a few more guys here that are in favor of stacks!! I just got mine put on a few months ago and absolutely love them. Straight piped and 5" tip outs. Here's a pic.

I put my bullhaulers on Saturday. When it is sunny out I will get pics, and send them along. I love it.

Any other stack pictures? Anyone, Anyone?

Here's a pic or Raymonds you guys were talking about at muncie. There's also a pic of Kyle03D's on the dyno ITS BEAUTIFUL! :ro) They are both rollin pretty good coal, thats for sure! I found these a forum i've ran across before...


http://www.dieselplace.com/forum/uploads/muncie_pull1.JPG

http://kyle.michael.net/dynosmoke.jpg

what shoudl i excpect to pay for a set of stacks? Are they louder than lets say a str8 piped summit 5in'er? What are you using for the down pipe back?4in?

How about just run the demo durby style..str8 out the hood,lmao....

I paid $100 each for my 6 inchers plus the steel tube in the bed and the elbow and stuff for getting it up there. I don't know if it is louder than others, and its usually not legal to have exhaust in front of the cab.

Zorganov and Bigblackdmax could you guys post some more pics of your trucks??? LOVE THE STACKS!!! :hail: :hail: Anyone else can post pics too if your truck blows smoke that should be in the pic please. Also Bigblackdmax do you have the 6speed or the Allison?? Thanx A bunch

I was wondering about under the truck, are they true duals are they Y-Piped inside the bed? I was wondering why I keep seeing themY-Piped instead of one pipefrom each exhaust manifold to each stack??????

There are no true duals on a single turbo diesel. The exhaust has to be plumbed to the turbo before it leaves the truck. The only way you could have true duals on a turbodiesel, would be to have parrallel turbos (one coming off each exhaust manifold).

Most of the stack setups I have seen are "Y"-piped in the bed.

. Also Bigblackdmax do you have the 6speed or the Allison?? Thanx A bunchI have a built allison.

Here is our stack pic,the price wasn't all that bad since all we had to pay for was the steel and I welded up.I wish I had some smoke pics.

http://client.webshots.com/photo/237616883/237626262VErmOf


Howling

what do yall think one stack on the passenger side with a flapper would look like? cool or stupid?

I have a buddy that has a dodge and had on tip out stack on the passengers side and when we put on the second it looks much better.Just my two cents.

Howling, I think that's the best setup of slant cuts I've seen. Just to the top of cab and always gotta have 6". Any smaller and it sometimes doesn't look right.