Well finshed her up tonight and here is the best picture I have for the night.
Put in the green keys, and 305/70/16 toyo open countrys and 16x8 eagle 102's. Rubs a bit on the front bumper, need to trim more off and a little bit of power loss but have the edge with attitude installing tomorrow.

I like it.

looks good, i did the same to my 04 and i put 1 inch blocks in the back.

Thats what i'm thinking i'm going to have to do. But i'm leaning more towards airbags since I tow a bobcat and excavator weekly.

where can you get 1inch blocks at?

where can you get 1inch blocks at?Just get bar stock and make your own. 1" doesn't need to be angled. The bad part is you probably don't have enough u-bolt, mine didn't, to get 1" blocks in so you might as well buy a 1 1/2" block and u-bolt kit.

I Run A Shop And Believe It Or Not The Only Place That Had The One Inch Kit In Stock Was Pep Boys, It Was About 26.00 And Came With U Bolts

My stock u-bolts fit with 1 inch blocks. Threads just barely came throght the nut with 1 extra turn.

BTW, Loco, very nice looking truck. I like the rims too!

Thanks guys. Tomorrow the juice goes in, long day at work today to even try to get it done tonight.

Where do you the green keys from and how hard is it to install them? Is the ride really stiff like when you just crank the T-bars up?

you can get them at your local gm dealer pn#15592573. they are actually keys from a 1500 series of the same year. they give you the extra ride hieght with out the bouncey ride of turning the stock keys up. they take about a half an hour to put in with the right tools.