|
Carbon04 11-27-2004, 05:24 PM Where can I find the OEM style plastic "T" used for splitting off of the corregated plastic tubing for wire raceways? I am a perfectionist when it comes to that (professional sparky). Any websites or partstore anyone knows of? Eric are you out there, do you have availability to get this stuff? Thanks in advance. partsguy662 11-27-2004, 05:32 PM Carbon - Napa has them in different sizes...from 1/4" up to 1 1/2...part numbers 784668,784669,784670,784671,784672,784673 Sizes available: 1/4",3/8",1/2",3/4",1",1 1/2" If not in stock, they should be able to have them for you the next day.... Scott GMCSLEHD 11-27-2004, 08:05 PM Or, if you need a bit of stuff, try www.waytekwire.com (http://www.waytekwire.com) , they have tons of high quality electrical stuff. Josh Carbon04 11-27-2004, 10:04 PM I never checked NAPA but they are 5min away......................thanks dmaxalliTech 11-28-2004, 10:27 AM if you find them, lemme know.. we are talking the ones that clamp onto the conduit and then slip over a stud? partsguy662 11-28-2004, 11:26 AM if you find them, lemme know.. we are talking the ones that clamp onto the conduit and then slip over a stud? That's not the ones I was referring to eric...These are just the plastic "T" that a guy can use to join wire loom together with...I'll look in my catalogs tomorrow for the stud type.... GMC-2002-Dmax 11-28-2004, 11:51 AM NAPA I have three on my wall in the garage still in the plastic blister packs. If some one is stuck I have easy access to getting them PM me if you really need one. TONY Carbon04 11-28-2004, 08:21 PM I can use both, they each have a purpose. NAPA is close is you can get the "stud type" part numbers. Parts Guy are you a district rep for NAPA? If so what is your area? Thansk for all the help everyone. partsguy662 11-29-2004, 11:23 AM I can use both, they each have a purpose. NAPA is close is you can get the "stud type" part numbers. Parts Guy are you a district rep for NAPA? If so what is your area? Thansk for all the help everyone.Nope carbon, just spent a lot of years behind the counter here...The reason I had the part numbers when you posted this question is I was at work, standing next to the belden catalog that has these in it):h I don't have a source for the "T's" with the stud mount though, just the regular units... | ||