I have a Chev2500HD and i am wondering where is the knob or screw that adjust the headlight left/right, i Know how to adjust the up/down.

It's on the opposite side of the headlight from the Up/Down adjustment. It is also hidden a bit deeper down than the other. Look for the hole next to the hood bumper just behind the headlight and next to the fender.

It's on the opposite side of the headlight from the Up/Down adjustment. It is also hidden a bit deeper down than the other. Look for the hole next to the hood bumper just behind the headlight and next to the fender.

thanks for your help, i will try to locate it tomorrow!

I am unable to locate it....Is there a picture that i can see where the adjustment knob is?

I am unable to locate it....Is there a picture that i can see where the adjustment knob is?Here ya go! It was raining out this morning, so the pics aren't what they should be! You also don't need the special tool to adjust them. Just get a small 12 pt socket on a nut driver and adjust away. A 6 pt will work also. I can't remember the size of the socket off the top of my head.

Left & Right
http://groups.msn.com/_Secure/0UQAJA2AY1tG5hd2qMH2OfXBqJlNmS3wdQ!jcklwQI5Msn17G8 wN9iayhZmNL4jVyyxaJrI82OKhJ69bjfSs!Nw9QBBw9CdC2qBf Zm871XUA0LWMh6tIXubg79jk!qEJZ/DSC01427.JPG?dc=4675499232897049360

Good Luck!!! And just in case you need to adjust the height, the hole just outside the hood bumper on both sides. Use the same socket for this one!

Jeff

2003 and 2004 Chevy trucks, I was told by my dealer, do not have left to right adjustment. Can anyone confirm this. Seems to be cheap and, I would think, not too legal. My lights cross each other about 40ft in front of the truck. That forced me to run them lower than level so as not to be flashed after light upgrade. Thanx Geo 2004 CCLB 2500HD Chevy

2003 and 2004 Chevy trucks, I was told by my dealer, do not have left to right adjustment. Can anyone confirm this. Seems to be cheap and, I would think, not too legal. My lights cross each other about 40ft in front of the truck. That forced me to run them lower than level so as not to be flashed after light upgrade. Thanx Geo 2004 CCLB 2500HD Chevy
Geo,

Mine is an '03 and does have a left to right adjustment. See pictures above!

2003 and 2004 Chevy trucks, I was told by my dealer, do not have left to right adjustment. Can anyone confirm this. Seems to be cheap and, I would think, not too legal. My lights cross each other about 40ft in front of the truck. That forced me to run them lower than level so as not to be flashed after light upgrade. Thanx Geo 2004 CCLB 2500HD Chevy

Think your dealer is blowing smoke. Also recommend you have a properly equiped garage adjust them to assure you aren't blinding everyone on he road.

I still cant seem to see it in my 04, there is no hole like that on my truck!

I still cant seem to see it in my 04, there is no hole like that on my truck!Must be that what the dealer told geo was true. About the 04's anyway!Censored Sorry to hear that Chev2500HD! If we were still building the 04's, I'd check it out for ya. I'll go look anyway to see if we are building them that way on the 05's.

Jeff

thanks, i think the 04 and 05 headlights are the same.

On my '04 chevy the adjustments up/down/left/right are on the head light assembly.

does anyone have a photo of the up/down adjustment on a 04 ? im going to adjust it after getting every driver pissed off for the past 6 months with my lift.

On my '04 chevy the adjustments up/down/left/right are on the head light assembly.
so where is the left right located?

Up and down adjustments on 03,04 chevy (GMC is different), is on top (between the two beams). It is a torx screw. It looks like you need to use wooden shims (like hanging at door or window frame). Pretty cheap eh! My dealer (the same one that tore my engine apart to install an injection pump to cure the surge that is still there), has a wall with a line on it, to align headlights (same line for all height vehicles) (scarey eh!). Geo.

Up and down adjustments on 03,04 chevy (GMC is different), is on top (between the two beams). It is a torx screw. It looks like you need to use wooden shims (like hanging at door or window frame) to align left to right. Pretty cheap eh! My dealer (the same one that tore my engine apart to install an injection pump to cure the surge that is still there), has a wall with a line on it, to align headlights (same line for all height vehicles) (scarey eh!). Geo.

ttt Anyone got a better way to adjust headlights, L to R, (03 and 04 Chev) other than wooden shims. Thanx Geo.

I'm not old enough to use age as an excuse...anyway. I could have sworn that when I drop the assemble a couple of months ago, that I had to adjust the horizontal alignment, but now that I look at it I'm not sure. With that pin I don't see how shims would make a difference.