Info please, How do I go about blocking and fingersticking my egr, thanks in advance! Jym...

http://www.kennedydiesel.com/ it cost about $50

The instructions are easy to follow.You can print them online or search for tips from those who have done it. If you do decide to install it, be sure to put an old towel under your work area so you don't drop the nuts into the black hole around the bell housing.

Thanks for the tips really appreciated! Jym...

What RCH said. Solder connections for the stick. Get the gasket on the correct side of the plate. Make sure plate is all the way in before you tighten up.