Blackedout Dmax
09-03-2007, 10:03 PM
My stock tranny was holding, but was told the valve body would help. Now the tranny defaults very easy. Anyone else ever have this problem?
|
Mike L. 09-03-2007, 10:19 PM My stock tranny was holding, but was told the valve body would help. Now the tranny defaults very easy. Anyone else ever have this problem? You want to try that again? Blackedout Dmax 09-03-2007, 10:22 PM Installed BD valve body and now tranny goes into limp mode very easily. gtmax 09-08-2007, 08:43 AM Blackedout - In your original post did you mean that your stock tranny was NOT holding? If that's the case it's probably not a VB problem could be clutches, maybe programming. Modified VB COULD put it limp easier if clutches are in poor shape--my guess. WanaDmxsub 09-08-2007, 01:46 PM Load a sig with truck and modifications. Helps us help you. Then read this sticky Bully Dog valve (http://dieselplace.com/forum/showthread.php?t=106158) and :welcome2: Blackedout Dmax 09-11-2007, 09:05 PM Thanks for the help. Took truck to shop and had a sticky solenoid. C2 clutch pack gone; going with SC stage IV. | ||