Hey guy's what was the flash # that gives you high idle?
Boneheads at the dealership had no Idea what I was talking about.
They also charged me 40 bucks for the block heater cordhttp://www.dieselplace.com/forum/smileys/smiley18.gif Ya I know and they didn't even give a reach around.http://www.dieselplace.com/forum/smileys/hihi.gif
Where does this cord hook too. I haven't got it yet they are
shipping it to me should be here soon. Thanks again for any info

I have the same truck you have. My high idle is automatic after about a minute of idle time. Fire it up and leave it alone for awhile and see if it speeds up to 1000rpm.

TSB 18-037-04

The flash for the user controlled high idle will only work with the auto tranny. A bummer for us manual owners. http://www.dieselplace.com/forum/smileys/smiley19.gif


MikeyB

Unfortunately the TSB is only for the Auto's...however mine is set so that I turn the Cruise on, and then press the set button. This brings the High Idle to 1000rpms. I can then press the Accel and raise it to 1500rpms. Pretty cool... As for the heater cord, if you remove, or work around the air intake box you will see and oil line running horizontal to the oil filter. A little below this line, and behind the filter is a black cap. Unscrew this cap and plug the cord in.... that's it. I think I will try to post a pick or two.... Edited by: Cummins600