If you have installed the Bully Dog kit can you later still install the Transgo kit or will the holes drilled with the bully dog not work with the trans go?








Thanks


Chris

ChrisF
I'm pretty sure BD drills the same holes as Transgo. We just don't know how big they drilled them. If you put the Transgo kit in, you will have to discard the BD valves and make sure the correct holes are drilled and that they are the same size.

mike

Mike, Have you ever Installed One of these kits?I installed one a customer supplied,And all I can say is Money down the Tube!

I have explained this way this BD kits works many ways.... Long story short.. throw your hundred bucks out the window.

Just wondering if you ever did the transgo kit in the tranny that had the bullydog kit previously installed??

I have the same problem.. I installed the bullydog last week, then proceeded to limp my tranny moments later!!! LOL

I am going to order the suncoast III kit, but am worried, because of the bullydog kit, I drilled holes where they are not supposed to be(or the wrong size.) I think I chucked the stock valves and springs when I put the bullydogs in. Do I need the stock ones or does the transgo come with it's own??

Thanks-

Transgo kit will have there own springs to replace bd springs. If you drilled holes too big, I will teach you how to make them smaller when and if that happens.

mike

Thanks for the reply and offering to help if I need it with the holes.. What about the bullydog valves, do I need to find my old/buy new factory ones or are the bullydogs ok, or does the transgo give you new ones with the springs??


Thanks again-

Trans go gives you the new valves you need. Mike or myself can show you how to correct for a hole drilled to big, so you wont have to replace the plate.

Thanks for the help guys.. I feel a ton better about this now..

Thanks again-