anybody know where i could order some used pmd's online. thought i might luck up an find one that was still good for 15 or 20 bucks

Ebay? Maybe you should start a 6.5L part rescue and call around to diesel shops asking for them.

Here's a couple pumps on Ebay, CHEAP, you could buy them, rob the PMDs and resell them...


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934879446&catego ry=33553) ;rd=1&item=7934879446&category=33553


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934189642&catego ry=33553) ;rd=1&item=7934189642&category=33553

wow, it would be cool if i could get that 1st one for under 50 bucks, i need the pmd and never know when i could need the whole pump, could somebody explain to me the whole ebay thing, on the 1st one it says high bid 19.99, so if i was to bid $25 dollars would i get it or is there a set low price. on the other one it says buy now for $150 so is that as cheap as it will sell for? and has anyone ever saw any other 6.5 parts on there, such as intercoolers and chips

i just did a little browsin and found a chip claiming to produce 80 hp for the 6.5, probably a lil to much for me unless i can find an intercooler on therehttp://www.dieselplace.com/forum/smileys/smiley2.gif just wonder if i could trust it though, from the pic it looks like a stock chip, no company name or http://http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewI (http://http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33597&item=7934784 875&rd=1) tem&category=33597&item=7934784875&rd=1

ebay has quite a bit of stuff for the ole 6.5.


glowplugs, injection pumps, lift pumps, exhausts, manifolds, turbos, chips, fsd heat sinks, pmd's, long blocks, short blocks, rebuild kits, injectors, etc.

http://http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewI (http://http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934879446&catego ry=33553) tem&rd=1&item=7934879446&category=33553


on this pump it they say it was off a 99, would it be ok on my 94, the pmd is what im after now but i might need the pump later

chevy, if you're getting a pump you don't need, I'd be interested in buying it as a spare one if it's in worthwhile condition.

When you're buying at that price, get a half dozen or so to have enough parts to assemle a couple. I think you can find used parts at fuel shops. Call a few and see what they'd sell them for. IE opticals,Pmd's?Edited by: quantum mechanic

will these pumps work on all electronic injected 6.5's or are they differnt for year models?

got a pmd on the way for 27 buckshttp://www.dieselplace.com/forum/smileys/hihi.gif just hope its still good