This subject has probably been covered, but a search didn't locate it.


I have an 04 2500HD shortbed crewcab LB7 and I want to use the high capacity truck pumps when I have my 5th wheel hooked up. I fuel up at Love's a lot and they seem to always be crowded. Not laid out very well for RV's either.


Best replacement?


Edited by: dmaxer

You could try http://www.Transferflow.com (http://transferflow.com/html/gm_fillneck_kits.html) - they make a replacement
filler neck for pickup trucks. I have used them with another truck, and
it made a BIG difference.



Mylash


Edited by: Mylash

dmaxer,


I went with the Transfer Flow fill neck for the same reason you are talking about. Very easy to install and works great. It took about an hour to install.

I bought and installed the Transfer Flow fill neck when I installed my larger tank. I have trouble filling at the full flow rate on both regular and large filler nozzles. Anyone else have this problem? I assume it has to do with how the vent hose is routed.





--Mark

If you have transfer flow fillers, and a stock or diferent aftermarket
tank, the vent pipe may need to be tied well up into the bed. I had
problems with mine and was in Californiai at the time so I went to
Transfer Flow's factory to ask.. They told me to tie the vent much
higher, and have had no problem since then.



Mylash

I struggled in a search to find it ,like you I can't wait for Nick to fix the performance of the forum.


This should help you decide in the Transfer fast fill is for you.It's a nice easy mod and works well.


Enjoy http://dieselplace.com/forum/forum_posts.asp?TID=12500&K (http://dieselplace.com/forum/forum_posts.asp?TID=12500&KW=fast+fill+neck+Instal led) W=fast+fill+neck+Installed


DO NOT SHORTEN THE RUBBER STOCK FILL NECK HOSE AS THE INSTRUCTIONS SUGGEST.


Mac