Hey guys, just wondering how much air you guy are running in your airbags with no load. I have firestones and an onboard compressor. Haven't really driven much without a trailer behind me since installed. I've been pulling a 26 foot flatbed gooseneck with a 2650 gallon water tank and a bunch of chemical and have been running about 80 to 90 psi, but not sure what to run empty, does 10-15psi sound about right? thanks for any input

i had the same set up and i ran about 10 psi no load and u should really need but 60 or 70 when loaded.

I've been running the minimum recommended pressure of 5 psi with no problems.

I have been running 15 psi, seems to ride smoother to me.