|
: Bilstein part #s for cranked tortion dodgerdogg 08-18-2007, 10:47 PM I have an '06 with the front tortions cranked just to level it. No lift on rear. Does anyone have the part #'s for front and rear Bilsteins for this setup? Thanks Trafficdude 08-19-2007, 10:54 PM Fronts: BE5-D146-H0 Rears: BE5-D147-H0 5100 Series dodgerdogg 08-21-2007, 09:54 AM Hey trafficdude, thanks alot. I see you live in Fontucky. I used to live there myself. Trafficdude 08-21-2007, 11:22 PM Hey, we've upgraded!! It's not Fontucky anymore, it's called Eastern Rancho Cucamonga!! :D D/M ON 20'S 08-22-2007, 12:48 AM The d-146-ho is actually a dodge shock, it will work, but the acctual correct part number is be5-6140-t5 dodgerdogg 08-22-2007, 09:41 AM Hey, we've upgraded!! It's not Fontucky anymore, it's called Eastern Rancho Cucamonga!! :D peolple keep doin' that, it'll be Eastern Rancho Cucamonga all the way to San Berdoo!!:D Trafficdude 08-22-2007, 09:02 PM :eek: Trafficdude 08-22-2007, 09:40 PM The 5100 Series offers traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shock absorbers are designed for specific manufactured lift kits utilizing the stock O.E.M. mounting configuration. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Bilstein's patented Digressive self-adjusting valving delivers improved damping control and a smooth ride on all road surfaces at any speed. 5125 Series The 5125 Series offers Bilstein technology for custom applications. 5125 Series shocks feature Bilstein's superior single tube high gas pressure design for the up most in consistent fade-free performance and long life. Bilstein's patented Deflective self-adjusting valving delivers improved damping control and a smooth ride on all road surfaces at any speed. Available by travel lengths for custom applications Yellow Bilstein #f4-be5-6081-h0 Col- 11.10" Ext- 15.35" Valving- 3080/1195 Mounting- Pin-Eye Bilstein recomends for "keyed" 0"-2.5" trucks #be5-d146-h0 Col- 11.59" Ext- 16.04" Valving- 4395/1285 Mounting- Pin-Eye Read entire post here: http://www.dieselplace.com/forum/showthread.php?t=167885 Trafficdude 08-22-2007, 09:42 PM peolple keep doin' that, it'll be Eastern Rancho Cucamonga all the way to San Berdoo!!:D yeh, once we annex Rialto & Colton, we're coming to your town next!! You'll end up living in Fontucky again!! 66chevy 08-23-2007, 11:10 AM I have an '06 with the front tortions cranked just to level it. No lift on rear. Does anyone have the part #'s for front and rear Bilsteins for this setup? Thanks is this the same part numbers for a 4x2 ? Nor-Cal Nick 08-23-2007, 11:59 AM is this the same part numbers for a 4x2 ? Yes .. 2wd & 4wd are the same. Just 2wd is missing the front axle. Nor-Cal Nick 66chevy 08-23-2007, 12:54 PM Yes .. 2wd & 4wd are the same. Just 2wd is missing the front axle. Nor-Cal Nick thanks | ||