I want to put a Single 5'' stack in my truck. I would love to see some piocs if any of you guys have em!:) And any advice on the easiest/ most economical way to do it. I need a kit from my turbo back exhaust, and im going to get a stainless 5'' mitered cut stack to be even with the top of the cab. thanks-tim

Check my avator and garage

My garage.

Thankx guys! you both have some awesome trucks there! Are you guys using some type of kit or homemade? And how long are your stacks. That look is exactly what i want.;)

BTW, are you guys drilling a tiny hole in the bottom of the exhaust for water drainage? if so how big?

Mine is homemade, it worked out good where the joint on my 4" MBRP was right where the 90 needed to be, then i put a 4 to 5" adapter on top of the 90 then put the stack in the adapter. Im not sure how long mine is excatly and i cant measure it cause my trucks not here. No i didnt drill a hole in mine, i heard they still blow slobbery black suit everywhere when you do. I just cover mine.

-Rob-

My garage.
Can you please tell me how long your stack is? And what did you use to hook it up?

Mine is homemade, it worked out good where the joint on my 4" MBRP was right where the 90 needed to be, then i put a 4 to 5" adapter on top of the 90 then put the stack in the adapter. Im not sure how long mine is excatly and i cant measure it cause my trucks not here. No i didnt drill a hole in mine, i heard they still blow slobbery black suit everywhere when you do. I just cover mine.

-Rob-Thanks!

My garage has a few pics. Completely homemade, stack is 6" diameter, 36" long, and uses no flex pipe.

My garage has a few pics. Completely homemade, stack is 6" diameter, 36" long, and uses no flex pipe.
Thanks Bro! That also is the look i want, roughly even with the cab, looks like i need a 36'' stack.?

The stack wasn't long enough, so if you look, there is about a 12" piece of pipe that is between the stack and the elbow.

Here's one, there are more in my garage if you wanna take a look

later, TW

Thanks Guys! keep em comin':cool:

here look in garage

Perfect t_dub!

here look in garage
I dont see stack pics in your garage:mad:

Perfect t_dub!

Thanks!.. I've always got a bunch of junk in the back, so I figured in the corner with as little pipe in the box as possible was the best place for mine..

I do dig the "slightly off centered" look, and was gonna do mine that way... but, it was winter, and I had the time, so I figured what the hay.. I would try something different and try to fit this big pipe through this little space...

btw, those of you on the fence about a stack (or 2)...... The women dig the stacks......:cool_shad

later, TW

You can see mine in my garage. It's a Silverline black stainless steel 5" X 36". 'Bout to mount a second one right next to it if someone doesnt buy it soon . :D

You can see mine in my garage. It's a Silverline black stainless steel 5" X 36". 'Bout to mount a second one right next to it if someone doesnt buy it soon . :D


I was thinkin about goin with black chrome...:rolleyes: doesn't look much different than regular chrome though.. Maybe just the pics??? oh I guess you said its black stainless.. maybe a difference?

They look more like light smoked stainless steel. Since my truck is black they look darker when you stand at different angles.

You can see mine in my garage. It's a Silverline black stainless steel 5" X 36". 'Bout to mount a second one right next to it if someone doesnt buy it soon . :D
How did you know where to place your hole in the bed, I like your stack location, could you give me some inside the bed measurements of your hole?

btw, those of you on the fence about a stack (or 2)...... The women dig the stacks......:cool_shad

later, TW

:funnypost

Looks like imma be puttin on a stack soon:cool:

Here's one, there are more in my garage if you wanna take a look

later, TW Sweet truck! Now im torn on where to mount it!

Just put mine on this past tuesday, i used my muffler free 4" mbrp system and put in a 18" long 4"-5" 90% elbow with a miter cut 7" grand rocks 48" long stack that i had powder coated with a textured high temp black. looks great and pours the smoke. I really only had one place to put the stack, its about 14" from the passenger side and 3" from the cab. i also fabricated a piece of sheet metal to make a cover plate that i had linexd and then cut down my truxedo tonneau cover, i think it turned out great,,

Just put mine on this past tuesday, i used my muffler free 4" mbrp system and put in a 18" long 4"-5" 90% elbow with a miter cut 7" grand rocks 48" long stack that i had powder coated with a textured high temp black. looks great and pours the smoke. I really only had one place to put the stack, its about 14" from the passenger side and 3" from the cab. i also fabricated a piece of sheet metal to make a cover plate that i had linexd and then cut down my truxedo tonneau cover, i think it turned out great,,

SWEET truck man. You have done an awesome job with that thing. :bow:

How did you know where to place your hole in the bed, I like your stack location, could you give me some inside the bed measurements of your hole?

I cut the rear section of the exhaust off about 1ft past the bed and then positioned it just inside the frame rail (This is so you can see it between the bed and cab. It was almost lined up already). I then mounted my brackets in the bed lined up with the pipe and took measurements straight down for the hole. In the location I mounted mine you have to cut about 2/3 through the forward crossmember channel on the bed. I used a 4 1/2" hole-saw to cut the hole and then mounted the stack with the lower exit lip just above the cab. The rear section of exhaust that was cut off had a 45* bend over the rear axle so I cut it down and then removed the excess pipe from the intermediate that was sticking 1ft past the bed (It comes out to about the same length as a normal intermediate pipe). I then attached the flex to the reducer from the stack and ran it through the hole. From there it become trial and error to get the flex and 45* pipe cut right to fit.

http://i37.photobucket.com/albums/e65/duramaxdiesel224/DSC02322.jpg