Bit of a simple problem here. The marker light next to the turn signal has burnt out (9 years on the bulb; what do you expect). How do you take the lens apart to get at the bulb without breaking it? Thanks.





http://www.dieselplace.com/forum/uploads/Silvy/2004-11-06_200610_Lens.gif

Take the four screws out of the headlight assembly next to the marker light. Pull it out a little ways, as far as the light bulb wires connected to it will allow, and then you can reach in there and give the marker light assembly a little twist and it'll pop right out. Then you just pull the bulb out of the plug-in.


More simply put, just pull the four screws in the headlight assembly and look in the direction of the marker light. It'll be obvious what to do after that.

Thanks a lot! I'll go see what I can do.

Correction: Pull the four screws out of the BLINKER light assembly (not headlight assembly) next to the burnt out side marker light.