|
: A tip when programming with PPE. BMGhauler 07-30-2007, 04:47 PM If you have a trailer hooked up and the electric brakes connected, UNPLUG them before programming! I was programming my dad's truck last week and got stuck on XX. I had everything else turned off (but no fuses pulled) and this was the only thing that could've been screwing with it. I unpluged the trailer wires and restarted the programmer and everything was fine. Farmer Dave 07-30-2007, 07:14 PM I had the same problem one time with no trailer atached and I had pulled the fuses. I just started over and everthing down loaded fine. PitchBlack 07-31-2007, 04:51 AM Me too fire0021 07-31-2007, 08:05 PM Me to Dan@PPE 08-01-2007, 02:23 AM The LMM's are very sensitive on the buss system, If the other computer are talking to each other while you program your truck it will time out and you might have to try it again.... Dan Farmer Dave 08-01-2007, 10:53 AM The LMM's are very sensitive on the buss system, If the other computer are talking to each other while you program your truck it will time out and you might have to try it again.... Dan I am not complaining, I think the PPE is great. I would recommend it . | ||