zathynsdad
07-28-2007, 10:15 AM
Sorry if this is in the wrong place,
John Deere Low-Beam Headlamp Install
Part# AH211917 Bulbs Costs $23.99 per/bulb @ JDParts.com
1)First I removed these pins in order to take out the Headlamp Assembly
http://dieselplace.com/forum/attachment.php?attachmentid=42843&d=1185641526
2)Then Pull out the HL-Assembly and detach the connection from the lamps to free the HL-Assembly from the truck
http://dieselplace.com/forum/attachment.php?attachmentid=42844&d=1185641526
3)Next rotate the bulb to the left to release it from the HL-Assembly
(WARNING: do not touch the bulb with bare hands, as this will decrease the life of the bulb)
4)Being careful not to touch the bulb trim the bigger tab at the top left to the size of the factory tab
http://dieselplace.com/forum/attachment.php?attachmentid=42845&d=1185641526
5) Reinsert the new bulb and rotate to the right to lock it in
http://dieselplace.com/forum/attachment.php?attachmentid=42846&d=1185641526
6) Now reconnect the plugs to the HL-Assembly
http://dieselplace.com/forum/attachment.php?attachmentid=42847&d=1185641526
7)Reinstall th HL-Assembly and lock the pins back into place
http://dieselplace.com/forum/attachment.php?attachmentid=42848&d=1185641682
8)Check Install to make sure installation was correct and is properly working
http://dieselplace.com/forum/attachment.php?attachmentid=42849&d=1185641682
9)Install the other side using same technique (Remember DO NOT TOUCH BULBS)
http://dieselplace.com/forum/attachment.php?attachmentid=42850&d=1185641682
Posted this for some friends who were asking how to.
Installation was done on an 2001 Chevy 2500HD CC/SB 4x4
Later models may be different-Use this as reference only-Use at your own risk!!!!:D
John Deere Low-Beam Headlamp Install
Part# AH211917 Bulbs Costs $23.99 per/bulb @ JDParts.com
1)First I removed these pins in order to take out the Headlamp Assembly
http://dieselplace.com/forum/attachment.php?attachmentid=42843&d=1185641526
2)Then Pull out the HL-Assembly and detach the connection from the lamps to free the HL-Assembly from the truck
http://dieselplace.com/forum/attachment.php?attachmentid=42844&d=1185641526
3)Next rotate the bulb to the left to release it from the HL-Assembly
(WARNING: do not touch the bulb with bare hands, as this will decrease the life of the bulb)
4)Being careful not to touch the bulb trim the bigger tab at the top left to the size of the factory tab
http://dieselplace.com/forum/attachment.php?attachmentid=42845&d=1185641526
5) Reinsert the new bulb and rotate to the right to lock it in
http://dieselplace.com/forum/attachment.php?attachmentid=42846&d=1185641526
6) Now reconnect the plugs to the HL-Assembly
http://dieselplace.com/forum/attachment.php?attachmentid=42847&d=1185641526
7)Reinstall th HL-Assembly and lock the pins back into place
http://dieselplace.com/forum/attachment.php?attachmentid=42848&d=1185641682
8)Check Install to make sure installation was correct and is properly working
http://dieselplace.com/forum/attachment.php?attachmentid=42849&d=1185641682
9)Install the other side using same technique (Remember DO NOT TOUCH BULBS)
http://dieselplace.com/forum/attachment.php?attachmentid=42850&d=1185641682
Posted this for some friends who were asking how to.
Installation was done on an 2001 Chevy 2500HD CC/SB 4x4
Later models may be different-Use this as reference only-Use at your own risk!!!!:D