Dont shoot me when you read this cause its just an idea. I am running a 6" RCD lift with 35's and its time for new tires. The torsion bars are cranked all the way and i was wondering if i took out the block in the back and lowered the torsion bars, could i run 33's with out looking and running a retarded setup?

i would lower the front as much as possible close to 4" with the 33

And i should be able to clear the 33's without the block right? What about the shocks? Will I need different shocks.

And i should be able to clear the 33's without the block right? What about the shocks? Will I need different shocks.
a stock height truck can clear 33x12.50