marinessgt1970
07-05-2007, 12:43 PM
IP Adjustments for the DB-2 fill me in.. governor and fuel metering want a little more smoke
|
Tracy 07-05-2007, 02:01 PM Not Telling, at least untill you get gauges and turbo master or = for your own good (engine's) and the poor guy next to you at the stop light with his windows rolled down. LOL nosmoke_97 07-05-2007, 02:18 PM lol people are looking for more fuel for all the wrong reasons..... Just take the turbo off if you want more smoke..... marinessgt1970 07-06-2007, 01:09 AM i do atleast have a pyro and boost :D but no turbo master... i just want a hint more of some smokeyness i love it... my stacks blow it right into vehicles windows that are right beside me and i like makeing them choke jifaire 07-06-2007, 02:06 AM LOL ... just like the James Bond stunt car... does it do oil slicks, too? nosmoke_97 07-06-2007, 08:06 AM hey man will you post some pics of your truck and stacks.... do the feed the beast and youll get smoke all the way through the rpm range, but the egts are gonna be high.... Tracy 07-06-2007, 11:33 AM Since you have gauges and i'm sure that after telling you how much extra hp you will have with a turbo master or home made boost controller you will run out this very minute and turn up the boost so you can choke the guy out next to you with tire smoke. http://www.flashoffroad.com/Diesel/injectionpump/mechanicalpump.htm The older Fords used a similar pump to the 6.5's. Also here is a link to a good low cost home built boost controller that member Daustin came up with, I also recommend Heaths Turbomaster. http://www.dieselplace.com/forum/showthread.php?t=161604 or http://www.heathdiesel.com/P/HDP1243/ marinessgt1970 07-08-2007, 01:09 AM I threw some pics up... go look! nosmoke_97 07-08-2007, 08:54 PM Thats pretty kick ass.... Id like to see some pics of how they installed, and lol I'd also like to see a video.... not asking too much, lol I'd like to hear how they sound...... marinessgt1970 07-09-2007, 01:08 AM I done it all myself brother.... only had to weld on junction the rest is using 2 inch wide band clamps... I ordered the stacks and 5 inch pipes of the inet and got the 4 inch from the local muffler shop. It defenately sounds mean... and it smokes like hell... Ill try to get out on Monday and make a recording so everyone can hear! Tracy 07-09-2007, 01:18 AM I could imagine smoke pumping out of those stacks would be some sight. lol marinessgt1970 07-09-2007, 10:46 AM Lol it definetly pumps out as it is, and it will be awsome when i give it the fuel lol | ||