Currently running Cognitos UCA's w/a few cranks on the bars to clear 285's.

Im looking at a ProComp 6" set up and running 315/75 on 16X8's. Since Ive already got the Cognito UCA's I was going to get their upper hoops and run dual shocks up front.

Anybody else using this set up?

It would work fine. You could even use Pro Comp hoops and still use the cognito arms. But the 6" pc kit and the cognito arms and hoops would work fine.

Take a look at this we did a while back....

http://www.dieselplace.com/forum/showpost.php?p=1479935&postcount=10


You will need to do some fab/straps. The ProComp UCA drop out stops will not match the Cognito UCA and we allow the UCA to over extend. But it can be done.


Nor-Cal Nick

Take a look at this we did a while back....

http://www.dieselplace.com/forum/showpost.php?p=1479935&postcount=10


You will need to do some fab/straps. The ProComp UCA drop out stops will not match the Cognito UCA and we allow the UCA to over extend. But it can be done.


Nor-Cal Nick


Do you have any pics of what you exactly added? I am interested in seeing this.

Thanks for the info, but Ive decided just to go with Cognito for the lift as well (4-6").

You do realize that the cognito 4-6" kit will be around 5" of lift with 6" the max you can adjust it. Where as the ProComp full drop 6" kit starts at a true 6" lift and goes up from there.