cdn111
10-13-2004, 12:38 PM
Looking at some 17x10 rims. What size of tire would fit on these? How wide are the H2 wheels? I have seen some sets of those floating around pretty cheap
|
CStone 10-13-2004, 01:31 PM H2 wheels are 8.5" Wide x 17" Diameter. H2 tires are 315/70R17 cdn111 10-13-2004, 02:03 PM just called and they said the rims are 17x9 so would I need a bigger tire or would the H2 work CStone 10-13-2004, 04:49 PM Should work just fine if you ask me. The 315's bulge a little on the 8.5" rims. 9's should do fine. http://www.dieselplace.com/forum/uploads/CStone/2004-10-13_133940_Truck_Before_After_small.JPG Zorganov 10-15-2004, 05:35 AM Just watch out for rubbing. With the wider rim you're going to run into clearance issues in your fenderwells depending on how large the tire is. I run 10" wide rims and have minor rubbing issues with 315/75R16 tires even with a 6" lift in the truck. The 315/70R17 (H2) tires are about the same height and same width as mine, so you shouldn't have a problem as long as your backspacing is 4.5" and no less. cdn111 10-15-2004, 10:37 AM I've heard of alot of people running the H2 rims/tires without lift with no problem. Can I just run these with the torsion bars cranked? Zorganov 10-16-2004, 12:20 PM You should be able to. A 285 tire will always fit, however with the 315's you will have to trim some of your front air dam. Just remember when you crank the T-bars, be sure to get an alignment done after! -Zorganov | ||