if i put a levveling kit on my 07 classic d-max can i fit a LT375/50R18 (32.8tallx14.8wide)

height wise yes you might need some triming doue to width and the backspacing on the rims you go with i would try and tuck them in as far as possible some were close to a 5" BS

thanks for the help i got diamo 8 karat wheels the backspacing is 4.62"

are u refering to the micky thompson tires? if so they call those a 33x15.50. that is one wide tire. they reccommend a 12" wide rim, but you might be able to get away with a 10" wide. finding a 12" wide might be hard in a 18, a 9-10" is pretty common. so getting the most backspace you can would be your best to help tuck them in for fitment. i think 5.5" BS would be the most you could get.

but either way i think you looking at doing a good amount of trimming with the cognito leveling kit, bushwacker cutout flares would probably be the best thing to get for that wide of a tire/wheel combo.

are u refering to the micky thompson tires? if so they call those a 33x15.50. that is one wide tire. they reccommend a 12" wide rim, but you might be able to get away with a 10" wide. finding a 12" wide might be hard in a 18, a 9-10" is pretty common. so getting the most backspace you can would be your best to help tuck them in for fitment. i think 5.5" BS would be the most you could get.

but either way i think you looking at doing a good amount of trimming with the cognito leveling kit, bushwacker cutout flares would probably be the best thing to get for that wide of a tire/wheel combo.


ooops 5" for 16" rims 5.5 for 17 and up is what i see running alot the H2 at 17/18 with 5.5BS

when u say bushwaker fender flares do u mean trim the fenders b/c i dont want to cut into the fender of a $48000 truck

when u say bushwaker fender flares do u mean trim the fenders b/c i dont want to cut into the fender of a $48000 truck
the wheel fender liner there is a pic of a 07 with with a 35ish and 13is wide tire some were on a leveling kit

the bushwacker cutouts involve cutting metal off your truck, including a section of the bottom fender corner. but you will have to do this no matter what with a leveling kit and that size tire/wheel. i had to do it to fit my setup (see garage). if you do not want to trim this much i would suggest either getting a narrower tire or a bigger lift.