My first thought was to replace the torsion keys. After more research I have decided that a Cognito leveling kit would be a much better upgeade. How big of a deal is it to install???, its alittle deciving looking at it over the computer. I don't plan on running any crazy size tires, is it still advisable to install the pittman/idler supports while I am doing the leveling kit? I also would like a suggestion for which shocks to use.

Its been done quite a few times by members here. With some mechanical know how and tools im sure you could do it.

Thanks for the encouragement....It doesnt really seem to be extermely difficult from the instructions

The install is fairly simple. Will greatly improve ride compared to cranking the keys. I would recommend putting the idler and pitman braces on if you plan on putting anything bigger then a 265 tire on. If you don't put the braces on the idler and pitman will last long enough for your warranty to run out and be your $..

I'll go ahead and get the pitman/idler support anyway...Was thinking if picking up a set of 17" s off ebay. Thanks

I can always help you with the install if you need. You arent that far away. Bilsteins would be the best bet for shocks, but drop me a line and I will try to guide you through it all.

Thanks Marc

It's more intimidating than it looks. I thought it was pretty straight forward and I don't a lot of mechanical experience. NorCal's site has some great pictures.