|
: Where to inject N2O and Propane big_jon00 10-04-2004, 12:57 PM I have been reading and looking around about where to inject, pre turbo, post turbo, pre intercooler, or post intercooler. I am looking at getting a powershot2000 propane system and maybe down the road nitrous. I just don't want to run something through my turbo that I shouldn't. Thanks, JonEdited by: big_jon00 a64pilot 10-04-2004, 01:22 PM I think it's Super Diesel that makes an induction manifold just for people like you.http://www.dieselplace.com/forum/smileys/smiley2.gif Edited by: a64pilot big_jon00 10-04-2004, 01:31 PM Ok, thanks I'll try pm'ing him. Jon marcdeluca 10-04-2004, 07:27 PM I put lp into the air pipe ahead of the turbo. That way, you don't have to deal with fighting boost pressure, the gas gets mixed really well into the air with all the distance it has to travel, and the plastic is really easy to drill and tap. Don't put it in before the mass airflow sensor, the oil in the gas can foul the sensor. GMCSLEHD 10-04-2004, 08:46 PM big_jon00, Here's a pic of SD's Turbo Intake Manifold. http://www.dieselplace.com/forum/uploads/GMCSLEHD/2004-10-04_164557_SDMAN1.JPG Josh Micheal Tomac 10-04-2004, 11:08 PM inject N2O at the IAH big_jon00 10-04-2004, 11:57 PM sorry but what is IAH? sp33d 10-05-2004, 12:29 AM intake air heater. it's screwed into the turbo housing right below the boost sensor (right before the intake manifold). great place to inject if you don't have super diesels manifold. I've got the manifold as I also have boost pressure switches, my boost sensor, etc. plumbed in so I needed more. if you go the iah way, john kennedy has a fitting that can be used. very slick way of doing things and the truck can be made "stock" with no physical evidence quickly. though, the manifold also comes out relatively quickly with no evidence if you have an extra boot. both are good options. Kennedy 10-05-2004, 12:19 PM Shoulda stopped in for Open House. I had a IAH plug on hand to show. Already drilled/tapped for 1/16 NPT... GMC-2002-Dmax 10-05-2004, 06:55 PM Shoulda stopped in for Open House. I had a IAH plug on hand to show. Already drilled/tapped for 1/16 NPT... I got mine sitting in my center console...........http://www.dieselplace.com/forum/smileys/smiley3.gif Thttp://www.dieselplace.com/forum/smileys/smiley2.gifNY Minn-Kota 10-05-2004, 07:16 PM Doesn't do much good sitting there. http://www.dieselplace.com/forum/smileys/smiley2.gif | ||