|
Polarbear 10-02-2004, 10:00 PM Im changing over to synthetic in my front acle. I got the approiate white vent cap,and was wondering if theres anything tricky about it, or specfics to do... I was hoping for a do-it yourself article but no dice...Any help would be apprecaited...thanks-Adam roguedriver 10-03-2004, 09:18 PM Nope, it's pretty straight foward. Just screw the old one out and screw the new one in. Just dont overtighten the new one. Did mine in about 5 minutes. Actually squirted the new synthetic in the vent cap hole while I had the old one out. Hope that helps. Ken R. dmaxalliTech 10-03-2004, 11:46 PM ditto its just like screwin in a light bulb http://www.dieselplace.com/forum/smileys/smiley36.gif patrick 10-04-2004, 03:09 PM dont cross the threads... Polarbear 10-05-2004, 10:32 PM what would be considered tight? nice and snug hand tight good enough? Thanks modified 10-09-2004, 08:40 AM Lubricate new O-ring Torque to 18 ft lbs with 24mm deep socket, (15/16 inch deep will work) , with 6 or 9 inch extention | ||