|
cdhd2001 10-01-2004, 04:23 PM How much hp can it take before slipping? Looking to maybe do the transgo first then the converter. http://www.dieselplace.com/forum/smileys/smiley9.gif Mackin 10-01-2004, 04:29 PM Nevertheless I wouldn't drop the transmission disassemble reinstall without installing at least a Single Performance converter. All that will need to be done when installing the Transgo kit.There is a variety of Single Disc Converters available today reasonably priced. Unless your shooting for high Torque Numbers and many trips to the asphalt or dirt tracks a single will fit the bill in your case if your spendy restricted. Mac Diesel Power 10-01-2004, 09:43 PM i've seen a fresh stock TC fail at 850ft/lbs on a load cell... just ask tony, heat beat the snot out of his stock tc.. GMC-2002-Dmax 10-01-2004, 10:35 PM 810-820 lb/ft......... Makes some nice noises too.........http://www.dieselplace.com/forum/smileys/hihi.gif If you are going to pull the tranny and go into it.........get it so it will hold more than you need......... Once you taste the power.............it's all over......http://www.dieselplace.com/forum/smileys/smiley9.gif Thttp://www.dieselplace.com/forum/smileys/smiley2.gifNY dmaxalliTech 10-01-2004, 10:57 PM I have seen mine slip at the 750 tq mark... Mike L. 10-02-2004, 02:04 PM Most people that taste the power available to them in the Duramax turn into hard-core power addicts. I have proof, I have names. I am one of them. http://www.dieselplace.com/forum/smileys/hihi.gif Build the Ally strong the first time and get on with the rest. mike Blinky 10-03-2004, 10:25 PM Don't sell us all out Mike.....http://www.dieselplace.com/forum/smileys/smiley2.gif | ||