I was wondering if there is an easy way to get alot of black smoke with out havin to turn your programmer all the way up. I have ppe xcelarator and the only way i get some smoke is turning it up to level 4.any sugesstions. I want alot of smoke

I'd like to have more smoke too but from what I've read a programmer turned up is the only way.:(

what setting do you run on your ppe now and what setting to see any smoke?

Well i run it on level 2 i can very little and if i put it on level 4 i can see it good but i dont want to run it in that level all the time. The truck has power i just want alot of black smoke.

Black smoke is just quarters rolling out the exhaust pipe. The guy at the fuel station loves that!! I like to burn as clean as possible. Have fun anyway!!

programmer is the only way your going to get smoke to bellow out.

put a reallly REALLY dirty airfilter in it and she'll smoke a lil...lol

put a reallly REALLY dirty airfilter in it and she'll smoke a lil...lol

not too dirty or you may get too horny:eek:

haha...wow.

Put some saran wrap around the air filter. (don't go doing this)

put a smaller turbo on it lol , jk programming is bout the only sensible way , but black smoke is just unburnt fuel your waisting

How about you print out all the threads on "how do I get black smoke," crumple them up and shove them into your intercooler hose.

If ya really want to get black smoke...run stock ehaust with the cat and the muffler, wrap a towel around your airfilter (or get a very, very dirty one), run a programmer or chip with the fueling all the way up and the timing all the way down, leave your waste gate open, crank down your boost, and put it in 4wd and do a boosted launch with your parking brake on...you will get soo much smoke you wouldnt believe it.but also will be terrible for your engine

kyle