My wipers seem to have a mind of there own. Sometimes when I turn them on they will stay on even though I have turned them off, or they will stop in the middle of the windshield, or not stop at all. Sometimes the int. will not work, it will just stay on fast even though it is suposed to pause.etc.


What is the problem here?Edited by: Elky

Under the hood there's a cover over your wiper motor, takes a Torx something or other screwdriver to remove the cover. Sounds to me like the circuit board under there has crapped out (well not yet but its getting real close). There's 2 contacts on the board that the brass tips wear out on, if you bend the contacts for better contact they will work for awhile. I'd pick up a new board though soon. I can't remember what i paid for mine, maybe around $60 Canadian. I've replaced several. Its an easy job!

What year is your truck?


Call your local dealer and have them check your vin for recalls. It probably has one for windshield wipers.

It is a 1994 GMC sierra 1500.


There was a recall for the wiper motor circuit?

Bulletins for 1994 GMC Truck K 1500 P/U 4WD V8-393 6.5L DSL



<CENTER>Safety Recalls</CENTER> TSB Number Issue Date TSB Title</PRE>

<LI> 03023 MAY 03 Recall - Windshield Wiper Motor failure
<LI> 98065 MAR 99 Recall - Brake Light Switch Wiring Polarity
<LI> 98043 SEP 98 Recall - Windshield Wiper Motor Failures
<LI> 94-C-62A MAY 96 Recall - Front Seat Back Recliner Attachment
<LI> 94-C-62B MAY 96 Recall - Front Seat Back Recliner Attachment Failure
<LI> 94C62A APR 96 Recall - Front Seat Back Recliner Attachment Defective
<LI> 95C63A APR 96 Recall - Seat Belt Buckle Comes Unlatched
<LI> 95-C-63B APR 96 Recall - Seat Belt Unlatches
<LI> 95-C-63A MAR 96 Recall - Seat Belt Buckle Unlatches
<LI> 94C03 DEC 93 Recall - Seat Bolts Not Installed
<LI> 94C02 SEP 93 Recall - Brake Pedal Pushrod Retainer Missing
</LI> </PRE>I just got that information from the alldata web site. So how does the safety </PRE>recalls work? If it hasn't been fixed, the dealer fixes it?</PRE>And also what is the front seat back recliner?</PRE>

do they replace those boards or do they just take them out and re- solder the harness tabs?

They replace the whole board.


When I had mine done, they said to just stop by anytime. It took about 5 minutes.