Holy Crap Quad


Just read what your truck smacked down this weekend. Congrats, very impressive, i bet the furd and dodge boys are still changing there pants.





I want what your truck is smokin, pronto. Whats the chances of lettin us know what has to be done to get those resultshttp://dieselplace.com/forum/smileys/Clap.gif, without having to kill us after you tell us.http://dieselplace.com/forum/smileys/Big%20Smile.gif You know i could maybe swing a moose hunting trip your way for some info.http://dieselplace.com/forum/smileys/HiHi.gif http://dieselplace.com/forum/smileys/HiHi.gif Man those are the numbers i want and then some. And here i thought i would stop when i hit 600hp, seeing that, i don't think so. Are you going to be making and selling any of the aftermarket hard parts for these dmaxs???????? Will be talkin to ya in a week or 2. Later Jeremy http://dieselplace.com/forum/smileys/Tongue.gif

How about dropping some ##########s for us.


Don't keep it a secrethttp://www.dieselplace.com/forum/smileys/Big Smile.gif

I seen it in the CT results





The Texas dyno day went over well...only had a few Chevy's/GMC's, but that was all it took. Bassin had a very respectable 425/820 while I only laid down 355/632 (no tranny work and 110 Quad...I am happy). Quad came in late in the day and rocked a couple Ford/Dodge guys that had been sitting on top all day in the 520/1000 range. Quad logged an amazing 647/1152!!! http://dieselplace.com/forum/smileys/Shocked.gif I would not have believed it if I had not been there myself to witness. There were a few more big dogs that ran after him, but I had to leave after being there for almost 10 hours...


All i can say is SWEEEEEEEEEEEEEEEEEEET Later Jeremy

Congrats QUAD!!!!http://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gif http://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gif





Those are incredible #'s. I echo what "heartbeat" said. With your Quad Stealth and a Suncoast converter I was chirping tires at 55 MPH. I look forward to your future tunes!! I see how you can turn such impressive quarter mile times now. Do tell, pleeeease.

HEY QUAD THAT IS AWSOME. CONGRATS

Now that's how you send a message about making serious power! Let someone else praise you and not your own lips!! Good job Guad!!! I do hope you won't be tooooo humble to let us in on some more of the details!!!

http://www.dieselplace.com/forum/smileys/Big Smile.gif http://www.dieselplace.com/forum/uploads/D89_peelout.gifEdited by: sdaver

Thanks for the support guys!





I really think that what I did is not important. I think we should look at what Sdaver, Mackin, Ratdoc, SIlver Bullet, BassinRver, and all the other guys I am not mentioning did. What is important is what the consumer sees for a power gain. I was more proud to see the stock Dmax down here on the dyno day. I wish I would have had his charts. The truck was a stock as you can get with a lift and 35" tires. He pulled around 230 stock, and over 430 with a tuner that was installed while it was on the dyno! His change engine oil was even on! That is what I like to see.


We have a couple of things we are working on and hopefully soon we will release them. We also have some things in the works that will make significantly more power than I did!http://www.dieselplace.com/forum/smileys/Big Smile.gif





In the next 2wks our N20 kit should be finished and ready to ship!


Our tie rod fix is in its final stages of testing....basically I am trying to bend a tie rod!


WE have some cool stuff I want out by the first of the year or sooner. Maybe even the first of Dec!





Just so you have an idea of what we were running.


215hp tuner....yes the same one that is availableto everyone.


Stock Turbo.


4" Exhaust


Our intake kit


Nitrous....1 stage....never show them all you got!


Injectors......not big enough!


No I can't reveal any more details than that! As soon as stuff is available I am sure you will see people posting bigger numbers!





Once again thanks to the people that support us and hopefully we can get some new toys for you guys soon!





Quad

Quad, did you make the tierods similar to mine by beefing up the stock ones or did you have a set made from scratch? I haven't bent mine yet after 75+ passes at the dragstrip. They've held up to 1.6X sixty foot launches in 4wd and even a couple dozen truck pulls with a locked front axle.

It's good that there will be an aftermarket set available to everyone since the stock ones are tiny. As an individual I didn't want to deal with the liability of selling an aftermarket steering component to the general public.

Anyway, when is the bigger turbo coming?

Are the injectors you are selling streetable for everyday use with/without a tuner/box? Are you selling nozzles or complete injectors with the bigger nozzles?

BTW, good #'s on the dyno, but I would rather see mid 11's at the dragstrip insteadhttp://www.dieselplace.com/forum/smileys/Big Smile.gif

In the next 2wks our N20 kit should be finished and ready to ship!



Did someone yell Bingo !!!!!

Mac http://www.dieselplace.com/forum/smileys/HiHi.gif http://www.dieselplace.com/forum/smileys/HiHi.gif http://www.dieselplace.com/forum/smileys/HiHi.gif

SUCK A$$..http://www.dieselplace.com/forum/smileys/HiHi.gifhttp://dieselplace.com/forum/smileys/HiHi.gifhttp://dieselplace.com/forum/smileys/HiHi.gif


Be nice to Daddy....and Daddy wil be nice to youhttp://dieselplace.com/forum/smileys/HiHi.gif

SUCK A$$..http://www.dieselplace.com/forum/smileys/HiHi.gifhttp://dieselplace.com/forum/smileys/HiHi.gifhttp://dieselplace.com/forum/smileys/HiHi.gif


Be nice to Daddy....and Daddy wil be nice to youhttp://dieselplace.com/forum/smileys/HiHi.gif

Easy your about to get Double Dipped !!! http://www.dieselplace.com/forum/smileys/HiHi.gif

Just looking to freshen up a LIL !!!
=>http://www.dieselplace.com/forum/uploads/dynoday_004.jpg

Mac http://www.dieselplace.com/forum/smileys/Approve.gif

Quad...

What truck did you run those numbers with? When I first saw those numbers I assumed it was a Dodge.

2003 D/A 4x4 CC with Emissions!

Any info on your intake set up? Site didnt apear to have much info. Hows it compare to the AFE in the way of noise? Is it basicly a AFE look alike? What kinda filter element? TIA


And BTW schweeeeet!http://www.dieselplace.com/forum/smileys/Clap.gif

congrats quadhttp://www.dieselplace.com/forum/smileys/Clap.gif


whats the safest/smallest shot of nos to run and be some what "einge safe"...i want to make over 500 ..i got the 215 and a comp juice for 490 but need to pick up a few hp to get to the century mark...





Thanks

congrats quadhttp://www.dieselplace.com/forum/smileys/Clap.gif


whats the safest/smallest shot of nos to run and be some what "einge safe"...i want to make over 500 ..i got the 215 and a comp juice for 490 but need to pick up a few hp to get to the century mark...





Thanks just start out with small nozzles like a 15 or a 20 jet if you have 490 already that is all you should need

www.quadzillapower.com/bigdawg-dyno-results-small.wmv (http://www.quadzillapower.com/bigdawg-dyno-results-small.wmv)

WOW http://www.dieselplace.com/forum/smileys/Clap.gif

Enough said, action is louder than words!!http://smileys.smileycentral.com/cat/26/26_1_100.gif (http://www.smileycentral.com/?partner=ZSzeb001)





http://www.smileycentral.com/sigpc=ZSzeb011 (http://www.smileycentral.com/?partner=ZSzeb011)

Thats awesome.http://www.dieselplace.com/forum/smileys/Clap.gif Gotta love the extra soot from the injectors. Can't wait til you start to release some goodies. I'm still in aw over the numbers, simply stunning, keep up the excellent development Quad. Later Jeremyhttp://www.dieselplace.com/forum/smileys/Approve.gif

I know a .055 jet is safe, I've made about a dozen nitrous passes so farEdited by: mtomac

http://smileys.smileycentral.com/cat/4/4_1_8.gif (http://www.smileycentral.com/?partner=ZSzeb001) <A href="http://www.smileycentral.com/?partner=ZSzeb001" target="_blank">http://smileys.smileycentral.com/cat/4/4_1_105.gif

</A><A href="http://www.smileycentral.com/?partner=ZSzeb001" target="_blank">



</A>Edited by: DIESEL 5

HOLY COW!!! Awesome!!


http://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gif

Just listen to Tomac he knows everything.http://www.dieselplace.com/forum/smileys/Clap.gif

Damm Quadd.......... That's really nice. There has got to be more HP out there, you burned all the smoke! It's nice having the smoke burned..... it let's people see who's in 2nd... right Mac. http://dieselplace.com/forum/smileys/Wink.gif http://www.dieselplace.com/forum/smileys/Big Smile.gif Sorry Mac, I just couldn't help myself with the little "short" stabb. http://www.dieselplace.com/forum/smileys/Big Smile.gif





Burner-------&gt;

that laughinghttp://www.dieselplace.com/forum/uploads/A2B_hmm3grin2orange.gif gas sure clears the smokeEdited by: sdaver

Only on the dyno.


On the street it soesn't clean up, I just can't load the motor very hard on the lightweight dyno.





Tomac,





Who says we haven't run faster than 12's?

you should be more than 3/10's faster than I am and running in the 11's.Edited by: mtomac

Damm Quadd.......... That's really nice. There has got to be more HP out there, you burned all the smoke! It's nice having the smoke burned..... it let's people see who's in 2nd... right Mac. &lt;IMG alt=Wink src="http://dieselplace.com/forum/smileys/Wink.gif"&gt; http://www.dieselplace.com/forum/smileys/Big Smile.gif Sorry Mac, I just couldn't help myself with the little "short" stabb. http://www.dieselplace.com/forum/smileys/Big Smile.gif





Burner-------&gt;

That's ok you had your chance to come and place your self in the standings,but ..... Where do you think you would of landed, Good O'le Dixie! ??? http://www.dieselplace.com/forum/smileys/Embarrased.gif

Mac http://www.dieselplace.com/forum/smileys/Big Smile.gif Edited by: Mackin