I am getting ready to install and RCD 6" lift on a 2005 CC LB 4x4 Chevrolet. My question is to those with an RCD lift what wheels are you using and what backspacing are they?


Thanks.

I have 17x9's alcoas with 5" rear spacing. Had to add .250" spacers (really only needed it on one but added both) with them. Check sig 4 pics.

I know there are more of you out there with an RCD lift!!!!!

What ever you do make sure you get the proper backspacing, I ordered new wheels and tires, waited about 3 weeks for them to arrive. Waited about 3 hours for installation. Went to pull out of the bay and the Dumbarse ordered my wheels with the improper backspacing. They did not do a wheel check. Next thing I know they are breaking all 8 post on driver and passenger fronts to get the wheels off. The inside of the wheels were bound by the spindles and had to be forced apart with a sledge. Any way after a week of Bitchen 2 allignments and a HUGE discount they fixed it, so make sure your backspacing is right and have them do a test fit before you put it in reverse and mash the right pedal. The stupid thing for me was I did not need new wheels I just wanted them some times I cannot understand the difference between want and need. Good luck


http://noproblemcc.com/trucktalk/secondpix/Truckpix023x.jpg (http://noproblemcc.com/trucktalk/secondpix/Truckpix023.jpg)http://noproblemcc.com/trucktalk/secondpix/Truckpix103x.jpg (http://noproblemcc.com/trucktalk/secondpix/Truckpix103.jpg)





http://noproblemcc.com/trucktalk/secondpix/Truckpix009x.jpg (http://noproblemcc.com/trucktalk/secondpix/Truckpix009.jpg) http://noproblemcc.com/trucktalk/secondpix/Truckpix006x.jpg (http://noproblemcc.com/trucktalk/secondpix/Truckpix006.jpg)


Old wheels that were just fine just wanted 18's


http://noproblemcc.com/trucktalk/trucks/Truck033xx.jpg (javascript ;)Edited by: noproblem

http://www.dieselplace.com/forum/uploads/NMElkaholic/2004-09-30_053257_111_1192-1.jpgI have a 6" RCD lift, I'm using the Pro Comp extream alloy's 16x10's if i remeber correctly I think they are 4 1/2" back spacing. U doin the work your self? I did all mine, it was no biggie. U will be very happy with the lift.http://www.dieselplace.com/forum/uploads/NMElkaholic/2004-09-30_053212_111_1198-1.jpg

Im running 17x8 wheels with 315/70/17 BFG's, works perfectly.The wheels have 4 1/2 B.S.

Have an RCD lift on my truck and running Weld Stonecrusher wheels with Nitto Terra Grappler 315x75x16. The wheels are 4.5/8 back spacing.


Mark