Sorry it took so long to get these pictures out to everyone. This is how I moved the bumper up to accomodate an SS front bumper.

This is the side mount. Just drill the holes 2" higher on the mounting flange.





[URL="http://www.dieselplace.com/forum/garage.php?do=big&p=30205"]http://www.dieselplace.com/forum/garage.php?do=big&p=30205 (http://www.dieselplace.com/forum/garage.php?do=big&p=30205)
(Image has been resized. Click it for full size.)


There are 4 bolts that hold the rest of the mounts to the truck. I used 2" square tube with holes drilled through the center as a block to move it up. The original mount does have to be cut as you can see in the picture. then use the square tube as a spacer and buy longer bolts. all the same holes are reused, just with the new spacer between them.



[URL="http://www.dieselplace.com/forum/garage.php?do=big&p=30206"]http://www.dieselplace.com/forum/garage.php?do=big&p=30206 (http://www.dieselplace.com/forum/garage.php?do=big&p=30206)
(Image has been resized. Click it for full size.)


This is the same thing from a side view, you can see the two blocks in place.


http://www.dieselplace.com/forum/garage.php?do=big&p=30207 (http://www.dieselplace.com/forum/garage.php?do=big&p=30207)
(Image has been resized. Click it for full size.)



Hopefully this helps.

all your images are x's

yeah, but they do work. good enough. hahaha

http://www.dieselplace.com/forum/showthread.php?t=153735

Here are the pictures and info

Hey chevymike, you should post a pic of your rollpan!
thanks

blue72camaro- I just clicked on the x and the pix loaded.