Soon to pick up new LMM D-max......Just wondering if anyone can point me to a thread or pics of a 4" lift at 3" with 35's on? Does this fit without trimming? Trying to decide on tire size and/or leveling kit/suspension lift. Don't want to get carried with the lift and not fill the wheel wells. I have seen a couple with 4-6".....just don't know if anyone is leaving this lift short?

check my garage for pics it is a tuff country 4inch with 315/75/16. It is set at 4 inches and all i had to do was trim the lower valance a little.

check my garage for pics it is a tuff country 4inch with 315/75/16. It is set at 4 inches and all i had to do was trim the lower valance a little.

He's looking at a 7.5 LMM. I do not think it's gonna work. I have looked at the new trucks and it looks like GM made the wheel wells smaller. I saw a 1500 with a 6 (ish)" lift and 35's and if you hit ANY bump you would be in the sheet metal. there was very little clerance at the back on the front tires and almost none front and back for the rear. could you do it and put 35's on with a 4" lift.... yeah, but it's gonna involve lots of trimming.

didnt see that good luck on the new body style.