|
SMOKIN U 04-15-2007, 09:56 PM Just wondering where to plumb it in at? I bought the nos system and it shows were to plumb it on a ford and dodge, guess they think chevy got enough power :stick_out . I was going to pull down at TS Performance and they are allowing drugs so I didn't want to take a knife to a gun fight. Can you get the nozzel to close to the intake in the intercooler tubes? Thanks for any advice, Jon 1000hp 04-15-2007, 10:26 PM Put the nozzle as close to the intake manifold as you can. BullydogPowered 04-15-2007, 10:38 PM Put the nozzle as close to the intake manifold as you can. yep, the piece of blue hose that attaches the outlet of the intercooler to the metal part of the manifold is where the Super Diesel intake manifold installs DINO ONE 04-16-2007, 04:14 PM SD manifold is what I use and it works like a charm!!!! ratlover 04-16-2007, 05:48 PM You mean intake manifold right? If so yes. Dont want to go close to the air intake(filter and such) as you want it after the turbo IMO. BullydogPowered 04-16-2007, 08:01 PM You mean intake manifold right? If so yes. Dont want to go close to the air intake(filter and such) as you want it after the turbo IMO. yes i meant right at the manifold after turbo xcablb7 05-04-2007, 02:46 PM my last truck picked up .5 sec in the quarter by taking the n20 nozzle from the cold side of the intercooler and putting it on the hot side. sharpshooter 05-21-2007, 04:34 PM Would the nitrous be corrosive to the intercooler? duramaxdiesel224 05-23-2007, 08:45 PM yep as close as possable | ||