Do any vendors here sell a 4" T-304 Stainless Exhaust Tip? Something like in the pic below (it's a Gibson). I'm looking to replace my Banks tip with a 4" turn down type.


http://dieselplace.com/forum/uploads/CDB_13981.jpg


Thanks,http://www.dieselplace.com/forum/smileys/Big Smile.gif


Josh

I imagine you are more into soot control than performance - turndowns add one more bend before the exhaust hits the atmosphere... not like the tip will enhance or degrade performance. "Increases of up to 25 HP..."http://www.dieselplace.com/forum/smileys/HiHi.gif


Also, I haven't seen a double wall turndown, or even a rolled edge. Single wall MAY add some drone. Just some things to think about.


TyEdited by: tysmith

Ty,


Just trying to keep the soot off my quarter panel and innocent bystanders.http://www.dieselplace.com/forum/smileys/Embarrased.gif


Josh

Josh,


Try this link. http://www.itpdiesel.com/SSTips.shtm

TOY,


Thanks! I'll check them out.


Joshhttp://www.dieselplace.com/forum/smileys/Big Smile.gif

yes you can go here and order it www.proficientperformance.com

I too had a soot problem on rear quarter with the banks tip ... just installed an 18" Summit S/S rolled tip and had it welded on. Looks sweet and sticks out about 2" more.

TOY,


Thanks! I'll check them out.


Joshhttp://www.dieselplace.com/forum/smileys/Big Smile.gif





Josh, If you get one let us know how it performs. I am mainly interested in knowing if the turn-down will increase or decrease exhaust noise or drone, and if EGTs go up or down.
JP

Thanks again guys.http://www.dieselplace.com/forum/smileys/Approve.gif


I'm gonna order the ITP or Gibson (haven't decided yet) this weekend.


Heartbeat - I'll let you know how it works.


Joshhttp://www.dieselplace.com/forum/smileys/Big Smile.gif

Can't beat the summit tips for the price and quality. As good as any of them and I've had 4 others. 18" rolled tip, slight slant ...welded on. $46 shipped


http://www.dieselplace.com/forum/uploads/679_IMG_2431.jpg

I can not confirm, but I remember complaints from some guys with turndowns, claiming it really churned up dust and dirt, especially on gravil.

you could always take and run your pipe straight out the back.... then add the turn down whatever works. Just mho.http://www.dieselplace.com/forum/smileys/smiley9.gif

Tophog:


Where did you get that tip and what size did you get?


Thanks

Tophog:


Where did you get that tip and what size did you get?


Thanks





Summit Racing ... it's a 4" inlet to 5" rolled stainless tip ... 18" long.


Goto: http://www.summitracing.com/


Do a search on Summit part number:


SUM-691123