I have an 02 which i have had a 6 in. Fabtech lift on it for about 4 years,not one problem with the lift at all,except for the new front bearings which can happen on any lift,and 3 sets of cognitto pitman braces,----i just can't stand the wide look in the front anymore,i am thinking of switching the front out for a tuff country 6 in. Because it has the least amount of front end spread (3/8 ?) any comments on this or is there a better way.thanks for your help

the superlift has stock track width

TC lift is not a bad choice. I have heard Super Lift restricts steering in one direction, lock to lock, but have not experience with it.

Reineke,How far do your wheels stick out from stock ones,thanks----any pic's

I believe the number given is 3/8 inch per side. Pics in my garage.

Track width is the #1 reason I went with the TC lift. 3/8" per side isn't too bad. You really can't tell except if you stand at the rear of the truck and sight down the side. Even then, it's pretty minimal. I posted pics in the suspension section a while back.

Track width is the #1 reason I went with the TC lift. 3/8" per side isn't too bad. You really can't tell except if you stand at the rear of the truck and sight down the side. Even then, it's pretty minimal. I posted pics in the suspension section a while back.

So us some pictures of your setup, Post up in your Garage (http://www.dieselplace.com/forum/garage.php?) if you want...:)

I have 6" TC lift, note signiture on wheel backspacing, everything tucks in really well, looks great. You won't be sorry.