Does anyone make some type of plate or adaptor that will go in the square hole on the dash of a 2006 3500 Chevy? I would like to add a EGT in this spot.

PM Trippin. He made a few a while back and I'm sure he still has some laying around.

I already did. waiting on his reply. Thanks!

sheet metal, hole saw, flat black paint, and a drill and you would be done

Go for the pillar mount with three guages, that way you have it all done with the gauges you need and looks great.

pics of install anybody? im looking for a single pod just for a extra boost besides the edge.

I'm also looking for a single mount. Going with a digital boost & Pyro in one gauge. I was looking at the square hole in dash also. Let us know if Tripp'in has any plates available!

what i was getting out you need a piece of sheet metal the size of the hole, flat black paint to make it match up, cut a hole in it the size of the gauge with a hole saw, drill some holes to and screw it down to secure it or double side tape it in the pocket area

10 bucks worth of parts abs plastic would work too

I used plexiglass to make mine. Here is a write up I did on my website a while ago of what I did:
http://home.comcast.net/~duramaxbob/EGT.html

Here is a write up I did on my website a while ago of what I did:



Nice!