OK, I mentioned this sometime ago and I apologize for the delay, but I have 8 used 2nd generation PMDs which I have tested. In the interest of fairness, I will send them to the first 8 people to post a request on this thread. All I ask is for shipping cost + $25. While I cannot put a warranty on these units per say, if yours fails like in a week or if it doesn't work at all I will test and send you another one. OK, so who's interested???

Ja, here I am :)

am I in the 1st 8 ?


Let me know total cost shipping including

Lee, I don't know what freight will be to Germany, but if your willing to pay for it, I'll send it.

TDG


Correct me if I'm wrong, or someone else here will, The 2nd Gen ones are the perferred ones. Right ?

Sign me up. I will take one.

Sent you a PM

Jill

TDG,

you could send to Germany or to a shipping address in the US from where I'd get it send --- I'll have to check out what would be cheaper. Anyway, even with freight and taxes on it, it would be much cheaper than buying a new PMD.

The problem I see is transfering the money to you. Making a bank transfer would be expensive; I have a credit card, but I've no idea if I could somehow use it in this case.

Put me down for one, please.
PM on the way.

Doug

OK, let me clarify a couple of questions I've been asked so far that I should have stated earlier. As I said these are 34264 2nd Gen PMD's that I have individually checked on a test bench and they all worked. They will all have #5 resistors installed, no mounting screws and no pad. As soon as I get 8 takers and their respective addresses, I will make one trip to ship them all out. I will PM the tracking number and total to each recipient. As far as payment, either PayPal to TPatton@abilenediesel.com or you can send a Money Order, either one is fine with me. So, here's who I've got down so far...


1. Lee


2. Bowtie


3. QM


4. True HP/Wheatking


5. HamhockTX


6. Outriggers


7. ????


8. ????

ill take one

If i'm not too late, I'll take one. dang, asleep at the wheel, i was an interested party at threads beginning . ..


-Bob

bobt makes eight.

How does paypal work? Can I use it to make a payment?

GO


www.paypal.com (http://www.paypal.com)


and follow instructions to set up account


It takes a couple of days tfor them to verify you bank info and I believe if you put down someone email address as a referrance they get 5.00 so you might want to pick your friend LOL


should be simple

OK, here's who I got down,


Lee, Bowtie, QM, True HP/Wheatking, HamhockTX, Outriggers, Steiner43511, and BobT.


everybody but QM and Hamhock I need your address, if you already sent it, I apologize, please send it again, the sooner I get all 8 the sooner I can ship them, I only want to make one trip.


UPS Ground OK with everybody (except for Lee)?Edited by: Texas Diesel Guy

TDG, I'm going to set up a paypal account. I think it's easyest to send directly to me.

I'd send you a PM with my address, but it doesn't work --- seems that your username is too long.

It can eventually happen that you'll have to provide some kind of bill to accompany the package. They might refuse sending the package without a bill because the customs requires it. When I got the vac pump and the gauges, I had to pay German taxes on them --- but that package had been sent to my address at work, so sending to my private address can be different.

I'd send you a PM with my address, but it doesn't work --- seems that your username is too long.




What browser are you using ? Netscape ? If so try explorer I heard someone else had same problem with PM using netscape.

Mozilla --- Netscape is more or less the same, just looks different. Maybe it'll work with lynx or konquerer, I'll have to try ...

I'LL TAKE ONE!!! w_huisman@yahoo.com





Oh SHoot! TOO LATE! TDG- I guess I'll keep watching used ones sell on Ebay for $150. http://www.dieselplace.com/forum/smileys/Cry.gif Maybe sooner or later one will go for a reasonable price.


Hopefully I'll be a little quicker next time (and hopefully there is a next time).Edited by: w_huisman

TDG, please PM me your email address so that I can send my address to you. I'd send you a PM, but it doesn't work.

Huisman, I'm still waiting to hear something back from Outrigger, if he doesn't send me his address, I'll put you on the list instead and I'll send him one with the next batch.


So if there's anyone else interested, please state so on this forum so I know how many to look for.

I'm definitely interested, especially since I'm having stalling problems.

Status check. Anything new? TDG, provide me a total cost and I'll pay paypal asap. Thanks!


-Bob

next batch count me in! i need one for my glove box. i already have a paypal account so


lupey65@comcast.net

Huisman, I'm still waiting to hear something back from Outrigger, if he doesn't send me his address, I'll put you on the list instead and I'll send him one with the next batch.


So if there's anyone else interested, please state so on this forum so I know how many to look for.


GREAT! So am I "in"? I'd LOVE to get in on this! I got PayPal (though I've only used it once on Ebay and I'm not horribly familiar with it), credit cards, cash, ... what ever you want! w_huisman@yahoo.comEdited by: w_huisman

Tried to send you a PM reply but you have exceeded you quota on PM's.


Just let me know the total cost asn I'll send you a check.


Joe (outriggers)

Lupey, Huisman send me your address tonight and your 'in'.

Hey TDG, I definitely need in on a next batch if there is one. I used my spare this week.





bobt@lanstyle.com

TDG:


I just wanted to say that this is awfully nice of you to be organizing this and helping all of us out!


Thank-you! http://www.dieselplace.com/forum/smileys/smiley32.gif


PS: You got email!

Well I'm trying to get it all organized anyway, I know this is still taking me a little while to get done, thats why I insist that no one send me a payment until I can get them shipped and Tracking #'s / totals sent out to the recipients. I've been having the pull a lot of overtime lately, seem's that in addition the being the Lone Stanadyne guy at our shop, I've become the Re&Re guy too.


BobT250 I'll look for another one for you too, go ahead and send me your address too

well just let us know when you get it all sorted out. im in no hurry, knock on wood.

Well here I am a day late and a dollar short, but if you found 8 you may some day come across a 9th. If so would you put me on the list?

TDG,
I am unable to PM you... probably because I use Mozilla.
Let me know what we can do here.
Any help would be fantastic.
I cannot begin to thank all of you guys enough.
Thank You.abadv8@charter.netEdited by: tahoe2dr

TDG,


If / when you get more PMDs, I would be interested in a couple of them.


Thanks,


Greg


g_abell@yahoo.com

A couple? holy cow, one a piece is already a tall order.

I believe the PMD is going in by buddy's truck, and I'd like to keep a spare in my truck.


If you get more, shoot me an e-mail: g_abell@yahoo.com


Thanks,


Greg

OK, once again I apologize for the delay, but I"m afraid I'm going to have to ask for everyone who still wants a PMD to pre-pay for them.


Wade Huisman already did so and his is on its way, so now that I know how much shipping will be I'm going to do this flat rate for everyone, $30 shipping included.


Once again, I'm offering a very limited warranty on these, if it doesn't work I'll gladly send you another or refund you whichever you prefer.


Thanks and again, I apologize for those of you waiting for one of these.

Texas...I could use one when the next batch comes in...my truck just started surging and stalling the other day...i wonder how long it'll last running like this?? Anyone??

sorry...my e-mail address....


jtaulbee@coastalnow.net


THANKS IN ADVANCE!!!!!!!

i could also use one too when you get more thanks....


scottysanderson7@yahoo.com (scottysanderson7@yahoo.com)

TDG, sent you a PM. pls add me to the backlog if its still open. much thanks !!

Bowtie, QM, HamhockTX, Steiner43511, Outriggers and BobT


I have you down as the 6 inline for the remaining drivers, Wheatking has his and Huisman's is on its way. Yall did get that right? Prepay $30 INCLUDING shipping?


And as for the rest of you waiting patiently I have:


Bobt250, Lupey, Steiner, HowieE, Tahoe2dr, GregAbell, JBT4, Scottysanderson, Steve-R, and Alan46.


10 more orders, I'll see what I can scrounge up tomorrow and let yall know.

Thank you for all your efforts.


I have a question about my current FSD I'll post another thread.Edited by: Bobt250

I don't have mine yet, but I don't expect it to arrive till the middle of next week.


Thanks TDG! Yer my hero! http://www.dieselplace.com/forum/smileys/smiley2.gif

TDG I am guessing, cause I made your list, that you got your money from me. Thanks again

ill mail you a check monday. how much postage does it take to get to canada? or did you guys figure out paypal?

TDG--I certainly appreciate your consideration for our (forum members) well being in this area. Thanks--there's not many who'd do this for people they've never met. Let me know when to send the check, and it'll be in the mail.


Again, THANKS

TDG--I just reviewed the thread again...your address isn't posted...could I get it??


jtaulbee@coastalnow.net

Paypal is my first preference, send to TPatton@abilenediesel.com (TPatton@abilenediesel.com)


Check, M.O. whatever is fine too, send to:


Travis Patton


360 Torrance St. Apt. 407


Burlington, ON L7R 2R9


Yes, thats right, Ontario as in Canada, so just to clear up the comments that I'm sure will follow, I was born/raised in Abilene Texas, met/married a Canadian girl and we moved up here about a year ago.


Now, about those other 10 orders for PMDs, I found 3 more but have not tested them yet, but I have decided that in the interest of my warranty plan for the original 8 modules I need to keep these until all those persons are satisfied that theirs are working normally. Fair?

sounds fair to me Texas, just let me know when the next batch comes up

ok, im sendin it paypal.

Welcome to the Great White North and sure thats more than fair ..

TDG,

did you get the mail with the shipping address, and am I still on the list?

If I am, I shall set up a paypal account and transfer the money, but please do not send a PMD before you actually get the money, just in case it doesn't work.

Lee, there you are, no I haven't recieved anything from you. But you are by all rights still on the list for a PMD. I mentioned earlier I have 3 more now, I'll test them and send you one of them.

i definately need another PMD so can you put me on the next batch too?Edited by: Bumpin' Yota

Yota, your #11 on the waiting list, I'll do my best but don't hold your breath.

> Lee, there you are, no I haven't recieved anything from you.

Ja, here I am :)

Hm, the mail is dated Mon, 11 Oct 2004 00:50:17 +0200. I've just forwarded it --- please let me know if it gets through this time. If it doesn't, I'll have to find another way to send you the address ...
Edited by: 0lee

Hey TDG,


Living in Canada will give you new perspective on Texas, If you're awake and paying attention. It's the nature of subjective reality.

OK, here's where I think everyone stands now, please someone correct me if I missed anything... Here's who I have as people that I have promised a driver to:


Lee, Bowtie, QM, Wheatking, HamhockTX, Outriggers, Steiner43511, BobT and W_Huisman.


Wheatking and W_Huisman already have theirs, And I have recieved payment or made arrangements with Outriggers, Steiner and BobT.


Lee has promised to send Paypal, and Bowtie, QM and HamhockTX have promised to send a check, which I have not recieved any so please let me know if and when you sent it because I haven't recieved it.


Please if I have made any mistakes, someone let me know so I can make the correction, thanks!

Lee, Bowtie, QM, Wheatking, HamhockTX, Outriggers, Steiner43511, BobT and W_Huisman.


Lee has promised to send Paypal, and Bowtie, QM and HamhockTX have promised to send a check, which I have not recieved any so please let me know if and when you sent it because I haven't recieved it.


Please if I have made any mistakes, someone let me know so I can make the correction, thanks!





TDG


I should be on your paypal list some where. I showed to have paid that on 30 Oct 04


It show you getting it let me know please


Casey

OK, I have now recieved payment from everyone but HamhockTX, so if you still are interested, please contact me.


For those of you on the waiting list, as soon as I recieve feedback form everyone and know that theirs are all working I can sell the remaining 3 or 4 I have.

TDG, thank you very much!

I've sent word to Joe so he knows that there's something to arrive for me :) I don't know when he's going to send the PMD over to me, and it can take some time. I'll let you know when it arrives, but I think it's better not to wait for the feedback from me --- if the other ones work, it should be ok to sell the remaining ones. Otherwise, the others on the list might have to wait just too long.
Edited by: 0lee

i seem to have gotten bumped or forgotten. do i need to send you a payment? i was waiting for a go ahead b4 i sent it. let me know thanks

Lupey I did promise to put you on the list didn't I. See, good thing I posted to get people to remind me. I have your address, send payment and I'll send a driver.

payment sent just now! wooohooo! now thats some good proof of insurance to put in the 'ol glove box.http://www.dieselplace.com/forum/smileys/smiley32.gif i thank you and my truck thanks you.

Payment recieved, thanks Lupey, everyone's drivers have been sent now except for Steiner and Hamhock...I'm still waiting to hear from you Doug!

Hamhock/Doug here, just PM'ed you. Still interested, just really busy lately and haven't been to the forum in awhile.

Thanks!

OK, Doug is the last one on the list, so now the rest of you guys who have PMDs from me or have one on the way, please post on here to let me know that you have tested and are satisfied with it so I can start on the next bunch or send a replacement to anyone who needs one, thanks!

If you have anymore please put me on the list....Thanks...:ro):ro):ro)

Its already a long list...but I'll put you on 95

HEY HEY HEY LOOKIE What came in the mail today.
Thanks TDG got the PMD today.

TDC, Got my extra driver in the mail yesterday. THANKS !:)
Question: what size allen wrench is needed to remove FSD from the cooler plate? I need to be sure i have one in the glovebox along with a 14mm open end wrench.

Allen? Torx15 is what you need for the 4 mounting screws.
whats the 14mm for?

TDG, Where can I get the pad to put under this PMD when mounting?

should have asked me before I sent it ;)
don't you still have your old one?

TDG You talking to me? I am trying to put together a complete setup before switching over, so my old one is still under my old PMD. I didn't know they were reuseable are or they? So I was trying to find the best place to get one so I have it when i need it.

they're reuseable, so long as you don't tear it removing it. Best place, well, only place to get one is a fuel shop, 30598 PMD Pad. Don't know off hand what they list for, but I'll check for you tomorrow.

Alright, I'm getting really good feedback so far from those who have one of my PMDs, so, seeing that I have 4 more now, I'll go ahead and send these to the next 4 on the list....and those persons are....

Bobt250, HowieE, Tahoe2dr and GregAbell

Please contact me and send your addresses if you are still interested!

hehehehehehe im not #11 on the list anymore! :D Hopefully will be able to wait...lol

Let's see...

JBT4, Scottysanderson, Steve-R, Alan46, Bumpin' Yota, and 95-6.5.

Nope, your #5 now Yota ;)

I hate to ask, but what is a PMD. I feel humbley stupid, but for some reason I just feel like I need one. These acronyms always make my brain stem hurt.

You would if you had a 6.5L with a DS-4 IP.

PMD = Pump Mounted Driver or you could call it that stupid black box on the side of the IP that can't be gotten at without removing the intake...

PMD = Pump Mounted Driver or you could call it that stupid black box on the side of the IP that can't be gotten at without removing the intake...
dont forget to insert random explitives between the words 'stupid' and 'black box' when you are stranded on the side of the highway somewhere and its pouring rain....lol

Light sprinkling of other explitives throughout the quoted statement are also highly recommended! ):h

Just to let you know, my PMD has arrived :) Maybe I can shortly test it this weekend, but don't count on it. It's cold outside, and I've got too many things to do ...

I am interested, PM incoming. http://www.dieselplace.com/forum/images/smilies/smile.gif

I want one, do you still have any left?

NVM and KL8, you two would make 7 and 8 on the waiting list, which at this point, means your better off getting one somewhere else, sorry

JBT4 andScottysanderson, yall are up next, let me know if you want a PMD still or not, PM your addresses, thanks and Merry Christmas!

Then me please!:)

RS1, I don't have you on my waiting list, should I?

RS1, I don't have you on my waiting list, should I?
Woops, sorry. If you could that would be great!

Dan

if there is a waiting list ad me please ! i am always aday late and a dollar short

JBT4, Scottysanderson, Steve-R, Alan46, Bumpin' Yota, 95-6.5, RS1 and Human Hammer, don't hold your breath guys.

JBT4, Scottysanderson, Steve-R, Alan46, Bumpin' Yota, 95-6.5, RS1 and Human Hammer, don't hold your breath guys.
If I had I'd be dead....LOL

Still no more?

Do you have any left ? I can Paypal immeditely

Do you have any left ? I can Paypal immeditely
You'd be at the tail end of the line bro.....so can I and everyone else mentioned previously....

I went from first 2 or 3 pages to last of this thread, I think I missed a few requests.....:D

Anyway, I meant after all before me are done and/or are "undecided", I would like one too if possible.

I didn't mean to step on somebody's feet.....I'll gladly wait in line.

This thread has been pretty quiet, but I do have a couple more drivers now, but I need some help figuring this all out again...

Steiner, I know I owe you one first, I haven't forgotten, been to the post office twice now, lost your address, I though I had it in my wallet.

Someone else said they were sending me a check...I haven't gotten anything in the mail, and who ever you are, I haven't sent you anything either.

So, JBT4, ScottySanderson and SteveR. You are the next 3 on the waiting list, I know I tried to PM you guys before, please respond via PM or on this thread to let me know if you do still want a PMD or if you've since changed your minds, thanks!

if there are any left, i can paypal right away, or send a money order. just let me know. it would be good to have a spare!

Well Mr T, I hope your not in a big hurry ;) The list is long and slow, but if you want to wait thats no prob. You never know, some of these guys might have changed their minds.

put it like this, i need more parts in the shop like i need another wife! i can wait, i am in no hurry at all, take your time!

well, TDG, I know the line is really, really long, but even if I have to wait 2 years, plz put me down somewhere, thanks TDG.
Larry.

TDG, I'm definitely in. sent you a PM with details. THANKYOU!

The gm dealer sells new ones for $245 and some fuel injection shops will beat their price.

Anyone know the GM part number?

Tex,
I carried that driver in my glove box for 6 months, then one day meet a '94 6.5er at the fuel pump and he told me the engine was giving classic stalling problems so I helped him to put it on his truck. Do you thnk you'll see anymore of those?

I have a couple more right now, one is spoken for, I owe one to Adam Stein.

The other 2 I was going to hold on to incase someone got a 'dud' from me, but so far I'm hearing nothing but good reports! I don't even remember who the next 2 people were on the waiting list??

I got my collection of three that were stalling and retorqued the transistor nuts as gmctd suggests might help and wouldn't you now it every sigle nut (all 12) was finger tight. I'll try them out eventually :D

MY question is could we send ones that we have,get,buy or ,find to TEX to have checked out for a small fee plus shipping ? Or is there somewhere else we can get this done that we trust?

Best way to test them is on a vehicle, even better than a test stand. Remote mount PMD setup would be great for a PMD tester.

Thanks TDG I'll get to work on my "test stand"

OK, revisiting this old tired thread again, I have 6 more PMDs now.
2 are spoken for, one for CJK65, and one for Adam Steiner.
The other 4 have been tested and cleaned up, but I have no idea who is next on the list so please, if you are interested, contact me on this thread! thanks

Best way to test them is on a vehicle, even better than a test stand. Remote mount PMD setup would be great for a PMD tester.:exactly: It's worked for me.

TDG, I wasn't on the list but if you have an extra I would take one. If so, let me know how to pay.

Thanks,
Dan

TDG,i'am still interested,and will take one if any left.
Thank's Peter

TDG - this is your order and line up unless some of these people have already gotten one...

JBT4
Scottysanderson
Steve-R
Alan46
Bumpin' Yota
95-6.5
RS1
Human Hammer
val
mrTailLight
94duallyman
dmitch
sub5


I am still in on it!

Steiner, CJK65, DMitch, Sub5 and Bumpin' Yota.

That only leaves one more! I believe the priority list BY listed is correct, so previous orders will take priority, but I need to know this week!

I'am still interrested TDG!

Put me on the list too - I am sure I am going to need one eventually. Thanks

baabbott@hotmail.com

I am interested as well, let me know if you get anymore in.

I am interested as well, let me know if you get anymore in.

http://www.dieselplace.com/forum/images/smilies/exactly.gif Chad

I'll take one if you still have them. Always good to have three extras. PM me if you still have them and I can send you money via PayPal.

Thanks

TDG, if i'm on this list you can for sure count one me. Just let me know were to send the money.

Thanks,
Dan

Steiner, CJK65, DMitch, Sub5 and Bumpin' Yota.

That only leaves one more! I believe the priority list BY listed is correct, so previous orders will take priority, but I need to know this week!

I sent you a PM over 2 weeks ago.....you ok?

I'll tajke one if you dont mind.

TDG what are you charging for these extra PMD's cause i would be interested in them as well.

I got a half dozen more now, $30 each, shipping included.

I think its fair that Canadian customers get to take advantage of the exchange rate since shipping is cheaper for me too. So its 30 CDN if your in Canada, 30 USD if your Stateside.

I would like one if I replied in time TDG.

TDG I missed out on that last batch. Sign me up please.

Whats the address to you?

Tdg-----I'am still interested too.
Thanx again
Peter

Steiner and CJK65, yours have been sent, guys, let me know when you get them.

I have 6 MORE now, and I've recieved responses from

DMitch, Sub5, Bumpin' Yota and MDT

which leaves:
JBT4 -??
Scottysanderson -??
Steve-R -Didn't I send you one?
Alan46 -Same?
95-6.5 -Still want one right?
RS1 -??
Human Hammer -??
val -??
mrTailLight -Still wants one
94duallyman -??

DieselChick, mtrenegade, FishnSub, Dave 2001, BornReady6.5, flanman5, guybb3, nvmtnlion.
You guys are all new orders right?


If your on this list and you've already recieved one, please say so, if you haven't but you still want one, this is the priority list I'll be going by.

Oh, and just as a reminder, I prefer PAYPAL, send to TexasDieselGuy@hotmail.com, checks are OK, PM for address.

I'm trying to make this as fair to everyone as possible, it should be obvious that I'm not trying to make money at this. If anyone feels there is a discrepency in the priority list, PLEASE let me know, I'm trying to keep track but I just don't have the time and I apologize! Thanks

Contact your local Stanadyne Fuel injection shop. Any shop worth a dam throws all old PMD's away. Tell'em you want a spare and they will probably give you a couple for free. If they are using them stay away from that shop like the plague.

Rebuilt DS pumps need all new electronics.

I think I mentioned early on in this thread that the reason I have them is because we throw them away. We don't build pumps with superceded parts in them period.

yeah i just got mine the other day. thanks again TDG!

Hey I got mine in the first batch and glad to have it. Hate to see good parts go to waste.
Thanks TDG

Ya TDG, I'm a new order and thanks

Got it TDG .... THANKS

Any shop worth a dam throws all old PMD's away...
If they are using them stay away from that shop like the plague.
Once again, I've made if very clear what it is I have. Obviously, the guys I'm expecting will want one are not in a hurry to shell out 250 bucks for a brand new one, and I don't blame them. I've enjoyed the luxury of working in a couple fuel shops where good used parts are handed to me, I'm just trying to help out the next guy.

I've got to lock this thread down guys, take it to PM with TDG direct; last year I had to shut another thread down on someone offering IPs for sale at a profit; I was questioned why I let this thread stay active, as it was a sale item that should be put in classified section. I always felt that TDG's interest here was to help other out in a bind and not profit motivated per-sei.

Caveat on these PMDs has always use at own risk TDG has been very clear on that point, as DP points out and I tend to agree once these start showing sings of problems they should be tossed out. But if in a bind you could gamble on a used but good one, I ran mine for a year with one I kept bringing back from the dead, I just got tired of messing with it.

TDG since this is an ongoing offer and not just a dump of a few you had on hand at time of original post, please make same offer in classified section. I'm requesting this not because of something done wrong but to comply with same policy asked of all who post on the forum, so we don't have appearance of favoritism.