Good day to you all. I need to get a drive shaft loop system for my truck.

I'm not looking to build my own. I'd drive so many hours a day and have so little of hours of free time that this would be a great benefit. If someone would help me out on redirecting me to where I shell perks a system for my weekend truck.
This would make a great deal to me, if someone would go to extend to give me the proper information were and where to go to.


I plan to soon head out to Lyndon Poll's and would like to make sure that my truck is well and doubt fit.


I'd know a lot out there will say, I do not need it.!

But I do know that I want it preferred in aluminum in high-strength.


I would appreciate the feedback. Thank you, all in advance.

God bless

Sincerely, Dorian

Good day to you all. I need to get a drive shaft loop system for my truck.

I'm not looking to build my own. I'd drive so many hours a day and have so little of hours of free time that this would be a great benefit. If someone would help me out on redirecting me to where I shell perks a system for my weekend truck.
This would make a great deal to me, if someone would go to extend to give me the proper information were and where to go to.


I plan to soon head out to Lyndon Poll's and would like to make sure that my truck is well and doubt fit.


I'd know a lot out there will say, I do not need it.!

But I do know that I want it preferred in aluminum in high-strength.


I would appreciate the feedback. Thank you, all in advance.

God bless

Sincerely, Dorian

Tom Crick at FineTunning is making them, he's out of Montreal, QC, he's under the supporting Vendors

i have a set from them...so far so good

Thank you both for the info;) . I'll be contacting Tom Crick at FineTunning early this week to find out more information from him.

I've been dabbling with the idea of entering the polls. While I'm attending these events, I get that urge to want to jump on the track and have some fun. So I thought I'd better upgrade my truck. You never know at the spur of the moment I might decide to enter.

Again, thank you for your help.

Dorian:o:

PS. I know I should may start another thread, but I thought it would press my luck and ask you guys, since you're been very kind and helpful.

What should I do it for my truck to get ready for the polls.

I mean everything if tou guy's can give me a good list to go through with the much obliged.

Thanks in advance if you can help out.

Dorian

PS. I know I should may start another thread, but I thought it would press my luck and ask you guys, since you're been very kind and helpful.

What should I do it for my truck to get ready for the polls.

I mean everything if tou guy's can give me a good list to go through with the much obliged.

Thanks in advance if you can help out.

Dorian
Look in the Sled pulling forum, tons of info,

Here's a thread with pretty good info in it for getting started. ;)

HERE (http://www.dieselplace.com/forum/showthread.php?t=63713&highlight=getting+started)

Thank you both for the info;) . I'll be contacting Tom Crick at FineTunning early this week to find out more information from him.

I've been dabbling with the idea of entering the polls. While I'm attending these events, I get that urge to want to jump on the track and have some fun. So I thought I'd better upgrade my truck. You never know at the spur of the moment I might decide to enter.

Again, thank you for your help.

Dorian:o:
Can you post up what you find out? :D I hate to call & ask the exact questions. These guys have got to work sometime.

Can you post up what you find out? :D I hate to call & ask the exact questions. These guys have got to work sometime.

I just finish talking to Tom Crick at FineTunning, this morning.:)

A first off, this guy loves his diesel trucks, I was at work on my lunch break. When I called and got talking to him for damn near almost an hour.:cool:

He tried to end the conversation, then I asked someone were questioned and he answered it gladly, then he started asking me questions, this went back and forth for another half hour.

This guy is unbelievable. If you wanted a conversation with a very knowledgeable individual who's love's to talk on the phone, then this guy is your guy.:D


Now back to the question.

He is in the midst of combinin and he will only be reducing these once this yearg his shop with his partner. And we'll be finishing about a month. Then he'll be going into a small production run of these units. And he will be only going to want production run this year.

He told me if I want to geta unit I have to get my name on the pre-order list.

So if you're interested get your name on ASAP

he told me to PM him to let him know.

I have only one problem here, I don't even know his handle on dieselplace:eek: , I only know how to get ahold of him through the vendor section........does anyone know his handle?????:eek:


Oh well I hope this information helps you all.


And, again thank you, For all staring me in the right direction. I will not forget :ro) :rockit: :hail: :welcome:

Tranytom is his handle on here, and your right about him having the gift of gab:D .Nicest guy you'll ever want to meet, and can do just about anything you should see the his kitchen, built all the cabinets himself by hand, he also know how to install, allison's too!:D

Tranytom is his handle on here, and your right about him having the gift of gab:D .Nicest guy you'll ever want to meet, and can do just about anything you should see the his kitchen, built all the cabinets himself by hand, he also know how to install, allison's too!:D


Thank you for the info!!:thankyou2 :thankyou2 :welcome: