curtisb
09-15-2004, 09:37 PM
I have been running my Juice with Attitude on Level 4 for quite some time now and figured tonight that I would check the slip readings to make sure that I was not hurting my Alli. Does anybody know if slip percentages of about 30% are normal when you get on it?
Thanks.
Curtis
CYCLONE
09-15-2004, 09:42 PM
I HAVE SEEN 67.5 SEVERAL TIMES
I HAVE ALSO SEEN 100% BUT THE TRUCK KEPT MOVING SO I DID NOT BELIEVE IT
Blinky
09-16-2004, 12:07 AM
I have been running my Juice with Attitude on Level 4 for quite some time now and figured tonight that I would check the slip readings to make sure that I was not hurting my Alli. Does anybody know if slip percentages of about 30% are normal when you get on it?
Thanks.
Curtis
Converter unlocked its normal.... locked it should be 0.0
Wolford
09-16-2004, 04:55 PM
how do you get it to display slippage?? I have an LLY if that makes a difference
ratlover
09-16-2004, 05:14 PM
Put a hotjuice on a stock allison equiped truck and lay into it in 5th gear going 75 or sohttp://www.dieselplace.com/forum/smileys/HiHi.gif oh.....lly......stack a Steve Cole tune on top of the juice set to kill should do ithttp://www.dieselplace.com/forum/smileys/HiHi.gif
baimpala
09-16-2004, 08:57 PM
Wolford,
You can set the Attitude to display whatever you want. You have to hit menu, then juice setup, then display, then select 4 function digital, then select the four different parameters that you want to display, just make sure one of them is EGT, and you're all set.
Dennis
baimpala
09-16-2004, 08:59 PM
Also, if you are in Tow/Haul mode, after you get into second gear, you should see the slip go to 0.0 when the converter locks up. Otherwise, if you go WFO, the converter will lock also. If you aren't in T/H, then the converter will slip until it gets into 5th gear, then lockup.
Dennis