|
mfkruzer 03-30-2007, 09:53 AM 93 truck, new (rebuilt) 94 motor from international diesel (new York), started fine...began to see issues...oil...blowing out my pipe, black and thick smoke, with the pungeant tone of oil...all over my *** end... Pressure guage showing topped out at rev, does fluctuate some...worked fine before. Is it possible to have a malfunction? chrisk1500 03-30-2007, 09:55 AM What kind of play do you have in the turbo shaft?... mfkruzer 03-30-2007, 10:14 AM what is acceptable? mfkruzer 03-30-2007, 10:17 AM almost a half inch front to back, a little more up and around chrisk1500 03-30-2007, 10:20 AM That is a lot of play IMO... Read this thread and see if it helps at all.... http://dieselplace.com/forum/showthread.php?t=144074 CanadianRigger 03-30-2007, 10:21 AM I don't think that new turbo in your sig is new then........ thefermanator 03-30-2007, 11:09 AM My turbo has almost 180K on it and I still can barely get any play in the shaft. A 1/2" is HUGE for a turbo. mfkruzer 03-31-2007, 12:27 AM Ya. thankyou... catch me at www.airleaf.com (the box, and the shiny red ball) M. Fettig CanadianRigger 03-31-2007, 10:03 AM Looks like blatent self advertising to me? zxsmurf 04-03-2007, 08:13 AM mfkruzer Looks like you made the same mistake I did. I also bought a motor off of INTERNATIONAL DIESEL. Same deal- Oil pressure pegged at 80psi- the motor is twice as loud as my original and it leaks oil everywhere. They don't use valve pan or oil pan gaskets. They used permatex or silicone- They told me that's the way it comes from factory! The 1 year unlimited warranty covers parts only. They said they would send me gaskets and it would only take 3 hours to put them on. Sorry but maybe we can save someone else from making the same mistake. Did you get your core charge back? | ||