Hi,


Just thougth I would update folks on an idea that tuned out pretty good. I had the "4x4" graphics on my 2500 duplicated with black 3M Scotchlight to make a more subtle impact on my black truck. They are almost invisible in the daytime and light up at night.


Here's a picture at night with a flash and a picture in the daytime;http://www.dieselplace.com/forum/uploads/After_-_w_flash.jpg


http://www.dieselplace.com/forum/uploads/after_daylight.jpg

That's pretty cool! http://www.dieselplace.com/forum/smileys/Clap.gif

Very Cool !! http://www.dieselplace.com/forum/smileys/Cool.gif How much $$$$$$ ?

cougar....... dont ever try to remove them....... its next to impossible unless you got a whole lot of patience. theres actually a metalic film in behind a smoke tint. all my trucks are lettered like that. what did you give? just curious.

Very Cool !! http://www.dieselplace.com/forum/smileys/Cool.gif How much $$$$$$ ?





Thanks!


I paid about $35 for the pair. The guy at the shop had the pattern and it is no big deal to make them. Installation was about 15 min including getting the extension cord and the light (I did it at night). I spent about 2-3 min per side heating with a hair dryer, then peeled them off slow while hitting it with the hot air.


Using a masking tape line, it's pretty easy to get them on straight. I also lowered them a tad to make them line up better with the flares. They make many different colors from black to white. I don't know how well it would turn out with others colors, but it's worth a look, eh?


Cougar GT-E

you got a pretty good deal the raw material isnt cheap.