bmercer007
03-13-2007, 12:05 AM
I was wondering if anyone has towed with a superchip programmer on the highest setting? If so how did it work? How high was the EGT's? How did the trans shift?:eek:
|
jstrese 03-13-2007, 07:00 PM It worked good pulling a 4 place enclosed(maybe 7,000lb). Egt's will jump very fast on hills going down the freeway, u need to keep a very close eye on them. WGT 03-17-2007, 09:33 AM EGT wil climb fast and get very high. I think it is also hard on the stock trans. That is why they do not recommend it. I towed 6-7k with the performanc emode and it did rip though! mmcfd64 03-18-2007, 05:42 AM don't do it w/o a pyro. jstrese 03-18-2007, 10:08 AM don't do it w/o a pyro. :exactly: andymiller 03-18-2007, 10:27 AM What if you're not pulling just driving, I know you should have an egt gauge but can you still do it without getting stupid with the tuning? jstrese 03-18-2007, 10:55 AM I never had a problem on perf. setting. EGT's were allways below 1400 on long pulls like up to 120mph or something. But if you pull i would get a gauge. IMO. captain extreme 03-18-2007, 12:59 PM i haul quite a bit of wieght in the back of my truck at all times. slip tank - built my self 10gauge steel - about 250lbs 75 gallons of fuel - 700 lbs tool box with tools 400 lbs and my sled deck 250 lbs i'm just estimating these wieghts thats about 1600 plus lbs i haul around all the time and i have no problem getting my egts up to 1450 or so even of the line or on a long pull, don't even notice much of a diffence from switching from performance to tow mode highly suggest a egt gauge WGT 03-21-2007, 09:21 AM Is'nt 1400 a bit high? | ||