My 2005 CC had it the driver's door get caught in the wind. I heard a crack when it snapped backwards. When I shut it it has a little hitch in it although I believe it shuts tight. Can these doors be adjusted back to get it back to normal? Even though it seals shut I don't want to just "live with it" Things like that annoy me and I want it back to normal. Thanks in advance.

Had the same thing happen in the work van. Wind took it and bent it backwards. The drivers side quarter pannel got bent inward, and the door does not open all the way anymore. It was an older van so we left it, but yeah I feel your pain.

Same thing happened to me. It just didn't shut quite right afterwards. We found a GOOD body man that fixed it with a pry bar in about 5 minutes. Works perfect again.

The door check also pry broke.

That just happened to me a few weeks ago. What sucks is that I figured out why I have a wind noise at higher speeds and why my drivers door and fender had been repainted before I got the truck. Two small chips of paint/body filler cracked out when it hit (along with a small dent behind the side moulding). I was told that the only fix is new hinges and they are welded on.

I took my tweaked door down to the dealer and they fixed it under warranty! :)

Nice! Was it a big job?? I'd like to get mine repaired properly before it happens again, maybe worse then the last time.

A couple of hours in the body shop. I believe they replaced the bushings/pins and adjusted the door. Opens and closes like stock again!:D

Either replace the hinges or start shimming and adjusting. I would try shimming/adjusting first, be alot cheaper.