Hello to all. I came across 20 stainless steel 1" wafers... sort of like stainless hockey pucks. These things would be perfect for a slight body lift on my '05 LLY. I presently have 315s on it with the torsions cranked and some trimming, but it would be nice to get a bit more clearance. I am familiar with the body lift routine and the mods involved; but these mods are for 2 and 3" lifts. Ya all think I can get away with absolutely no cutting or extensions? Chime in experienced GM diesel lifters. Thanks in advance!!!

The bumpers and the fan shroud would still be a problem I bet. Let us know how it goes I was think of making a 1" BL myself.

I was thinking more of a 2" for mine...But i dont think there is any manuf. that make kits in a 2" correct?

You know 8100 Power there was a guy on EBay that had home made kits for around a $100. The feedback was all good and he had a 100% rating. You might want to check that out.

You know 8100 Power there was a guy on EBay that had home made kits for around a $100. The feedback was all good and he had a 100% rating. You might want to check that out.

Thanks, ill check it out...:)