Could someone give me a price range for having an Elocker put on the front axle? (Like what MTomac has installed)

check with randy's ring and pinion on the net. They are pretty reasonable.

last i knew, the unit was going for ~600 and about 3-400 for professional installation

last i knew, the unit was going for ~600 and about 3-400 for professional installation

Installation is not tuff (it is easier than a new ring and pinion) Basically, all you have to do is run a wires and drill a hole for them. Before you remove old carrier, you check backlash and preload and write them both down. When you install new carrier (I would use new ring gear bolts too) you reset backlash and preload and roll.

Thanks for the info.