minytrker
02-16-2007, 11:03 PM
I tried a couple of LLY tunes off the site on a 2005 LLY today and none of them worked. The truck woulsnt make any boost at all. I tried the 60, 90, 100, and 120 and all ran the same. None made any boost or power.
|
Max Power 02-16-2007, 11:07 PM Make sure you copy the tables from the tunes provided to your existing tune. Don't just load the tune as is. minytrker 02-17-2007, 12:07 AM Make sure you copy the tables from the tunes provided to your existing tune. Don't just load the tune as is. I did, I did a compare and copied the tables that were differnt that effected the tune. TurboBeagleBuggy 02-17-2007, 12:24 AM did you copy imperial #'s into metric tables? minytrker 02-17-2007, 03:27 AM did you copy imperial #'s into metric tables? Hmmm, I don't think so but I will double check once I get home. I hope its something that simple, Im pretty sure I still have the tunes I tried and didnt delete them. The Neens 02-17-2007, 03:42 AM I tried a couple of LLY tunes off the site on a 2005 LLY today and none of them worked. The truck woulsnt make any boost at all. I tried the 60, 90, 100, and 120 and all ran the same. None made any boost or power. Did all 4 tunes feel like stock?...Maybe it never "took" the reflashes... TurboBeagleBuggy 02-17-2007, 08:02 AM Hmmm, I don't think so but I will double check once I get home. I hope its something that simple, Im pretty sure I still have the tunes I tried and didnt delete them. Take a look at it and make sure that you have everything converted to Imperial. minytrker 02-17-2007, 08:18 AM Did all 4 tunes feel like stock?...Maybe it never "took" the reflashes... They felt worse than stock since the truck would make zero boost. I finally jusr made a simple tune from scratch and it took that fine. LarryJewell 02-17-2007, 08:59 AM why are you trying to load LLY tunes? According to your signature, you have a LB7 motor. That could be why the LLY tunes dont work. LarryJewell 02-17-2007, 09:00 AM oops, never mind, I finally saw you were loading into an 05 LLY. Krazykid 02-17-2007, 10:30 AM Just a quick question. After reading some of the other posts in this section I am under the impression that when you load a tune to the ECM it gets converted to Binary or Hex Code. So what difference should metric or imperical make? I guess as long as the whole tune is one or the other. sweetdiesel 02-17-2007, 10:54 AM Just a quick question. After reading some of the other posts in this section I am under the impression that when you load a tune to the ECM it gets converted to Binary or Hex Code. So what difference should metric or imperical make? I guess as long as the whole tune is one or the other. well he could be adding a ****e load of boost:D sierradiesel 02-17-2007, 07:36 PM Metric vs imperial makes a big difference. Look what happened to the Hubble telescope when they first tried it. minytrker 02-17-2007, 09:05 PM Ok I double checked and eveything was the same, both were imperial. How can these tunes work for other people but not on this truck? sweetdiesel 02-17-2007, 09:54 PM ok have you tried comparing to a stock tune with both tune to double check that you changed all the tables correctly | ||