hd guy
08-08-2004, 09:07 PM
i was wondering who has 37" tires and what size lift and what is your fender height because i want to go to some 18 inch welds and 37" tires but i would like to see some other rigs with them TIA
|
duramaxdiesel 08-08-2004, 11:00 PM Well I got'em sitting in the garage. I'm waiting to install my lift before I put them on thoughhttp://www.dieselplace.com/forum/smileys/Cool.gif hd guy 08-09-2004, 09:32 PM cool can't wait to see some pics when you're done LBZrcks 08-09-2004, 10:02 PM I've got a fabtech 8" with 37" GoodYear MT/R's, Prolly gonna go with 18"s and the toyo M/T's next. I haven't measured my fender height. I think that Voodoo has 37"s also, so he might chime in soon. Voodoo 08-10-2004, 08:36 AM I have them. Look at my sig and the link too the pics if you want. The only trimming I did was the front plastic below thw bumper and that was very little. Fender hight 49 1/4", Bottom of door 30", Door handle 54", and front bumper (middle top) 42". Mike330R 08-10-2004, 09:59 AM Love the truck Voodoo! Mine will get a 6" CSt lift, fox shocks and 35" pro comp tires Thursday. I can't wait to be driving a 'real' truck http://www.dieselplace.com/forum/smileys/Big Smile.gif MBRP 08-10-2004, 03:29 PM I'm running 37" Swampers. with the Fabtech 8" lift. Tires did touch the front bumper. I spaced the bumper out, not tire rub, no trimming. MB hd guy 08-10-2004, 06:33 PM thanks guys and good luck with your truck mike Voodoo 08-10-2004, 08:09 PM Love the truck Voodoo! Mine will get a 6" CSt lift, fox shocks and 35" pro comp tires Thursday. I can't wait to be driving a 'real' truck http://www.dieselplace.com/forum/smileys/Big Smile.gif You will love it! One question did you look at the Bilstein shocks? I only ask because I was going to go Fox, untill I saw all the bad ones my installer had. Mike330R 08-10-2004, 08:19 PM No I didn't but FOX is local to me and I got them direct. I can stop by if I have problems. Voodoo 08-10-2004, 08:23 PM No I didn't but FOX is local to me and I got them direct. I can stop by if I have problems. That is very cool I replied to your wheel post (pic) just in case you don't see it here it is; "You will love them! Tip and often over looked: Make sure the washers are removed on the lugnut studs before they mount the rims (should be one per axle sometimes two). The stock rims are cut for them, XD's are not. They are only used during production." Edited by: Voodoo | ||