I could find this package like 6 months ago when i didn't need it. But im sure someone has some info. An I know this is not the accesories forum. But thought someone might see this thats never looks in accesories.... Thanks

They are forsale in that forum right now.

i pieced mine together for about 900, h2s ebay, tires vfrrider, mounted them myself and balanced at bell tire... i got a "nice wheels man" at lunch today too.

I got mine from Prestige Products in Commerce, Ca. Ask for Rueben. I paid $950.00 for a set of 4 wheels and tires, and the wheels were chrome.

LOS ANGELES DISTRIBUTION/INSTALLATION CENTER
International Corporate Headquarters
2267 Yates Avenue
Commerce, California 90040
323-724-8700 • 877-772-7895 •
FAX 323-724-8715

http://prestigestyle.com/

Good Luck http://www.dieselplace.com/forum/smileys/Big Smile.gif Edited by: cadent44

$550.00 out the door in South Carolina for a set of chrome H2 take-offs...I guess the price falls under "Supply and Demand"...If all else fails PM me and I will check back with my local dealer...If he has a set we can work something out...of course shipping would be on youhttp://www.dieselplace.com/forum/smileys/HiHi.gif

What are the Size for the H2 wheels?


I assume they fit the 3/4 ton?

What are the Size for the H2 wheels?


I assume they fit the 3/4 ton?





H2 take-offs are BFG AT's 315/70R17


They fit the 3/4's with a little bit of trimming of the front airdam and turning up the torsion bars somtimes switching out to the "GRN" keys. Do a search there is plenty of info on this subject in this forumhttp://www.dieselplace.com/forum/smileys/Geek.gif

I thought you were tallking wheels, Ruber i understand

What are the Size for the H2 wheels?


I assume they fit the 3/4 ton?





Cjate...What exactly is your question? Rim size....width...backspacing? I was not trying to explain rubber to you but some of the answers are in those numbers.http://www.dieselplace.com/forum/smileys/Confused.gif If the question is about take-offs it is a tire/rim package.Edited by: RogueOne

ok,


What is the Rim size....width...backspacing and bolt pattern, this is the first I have heard they would fit and I am flored,


just suprized the H2 has 3/4 ton axels.


are they 17x8 w/ 5.5 back spacing? somthgin like that?


will the 315's fit better with more backspacing, 3.5 or 4"?

Check out these post's


http://dieselplace.com/forum/forum_posts.asp?TID=11719&PN=1


http://dieselplace.com/forum/forum_posts.asp?TID=8098&PN=1


I am away on vacation so I don't have the specific #'s in my head but that sounds close. As far as backspacing just look at the pictures in the above posts. There is very little protrusion outside of the wheel wells. I am currently running a set with stock torsion bar keys a couple of turns from maxed out and only occasional rubbing (switching the keys out next week). The only thing that I would recommend (as others have) is either switch out to longer shocks or do a temp mod of shimming your current front shocks(fender washers on top or 1” metal block on the bottom).http://www.dieselplace.com/forum/smileys/Rock On.gif