could some one provide some info on where to plumb the boost guage for my 2003? Some pics would be cool also. what do you all run for boost guages
mark

see here for a start http://www.dieselplace.com/forum/showthread.php?t=125339&highlight=boost+guage

Welcome to the Place, Take a minute and go to user CP and fill out your signature, it will help others help you.

Take a look in the DIY section, There are a few great guides to getting the job done. I used one called the 'guide to guage hotness'. Very clear with lots of pictures.
My truck is an 04.5 and I posted pics of the boost and EGT probe locations in my garage if you want to take a look.
Where ever you decide to put it, make sure to keep it clean. I stuffed old socks in both sides of the install (counted the number going in as well as out) and used a shop vac to get all the chips.
Good luck.

I am running the autometer sport comp II 0-35 psi. I believe Kennedy's website has a DIY section on the boost guage install. It is very easy.

http://dieselplace.com/forum/attachment.php?attachmentid=609&d=1103251048

http://dieselplace.com/forum/attachment.php?attachmentid=2160&d=1108523402