MaxFarmer
01-04-2007, 04:48 PM
I tried looking but cant find much info about the ATS head studs except that they are quite a bit higher than the ARP bolts. Is there a reason for this that I cannot find?
|
ZR1160 01-04-2007, 05:17 PM I don't think one is better than the other. ARP has a very good rep in the fastner biz. dmaxlover 01-04-2007, 09:46 PM I didn't think ats's studs have a hex broached in the end? Could be wrong tho. Ats uses H-11 material and arp uses 8740. ZR1160 01-05-2007, 09:11 AM The other thing is ATS was one of the first to have studs. IBDMAX'IN 01-05-2007, 11:17 AM I didn't think ats's studs have a hex broached in the end? Could be wrong tho. Ats uses H-11 material and arp uses 8740. They do have the hex broached in the end. And you are correct on the material. MaxFarmer 01-05-2007, 07:34 PM Can someone explain to me what the material difference is? I'm not familiar with those numbers. Thanks! dmaxalliTech 01-05-2007, 07:36 PM Both are very hard MaxFarmer 01-05-2007, 08:43 PM :p: dmaxlover 01-05-2007, 10:09 PM They do have the hex broached in the end. And you are correct on the material. Sorry my bad. dmaxlover 01-05-2007, 10:10 PM Can someone explain to me what the material difference is? I'm not familiar with those numbers. Thanks! Both materials have simular tensile strengths, but the H-11 can hold it tensile a bit better at a higher temps. MaxFarmer 01-06-2007, 12:26 AM Both materials have simular tensile strengths, but the H-11 can hold it tensile a bit better at a higher temps. Thanks, thats exactly the answer I was looking for.:thankyou2 | ||